Tensiometer

Tensiometer

Product catalog summary
Overview: This document provides technical specifications and usage guidelines for various types of tensiometers used to measure moisture in materials, particularly soil. It includes details on different models, their dimensions, and their specific applications.
Specifications:
  • Surface Tensiometer FV ZB9602TMFV: Designed for use on capillary matting and moist surfaces. Dimensions: 65 mm, Ø 70 mm.
  • Surface Tensiometer FO ZB9602TMFO: Suitable for thin layers of substrate. Dimensions: 65 mm, Ø 70 mm, with a sink depth of approximately 30 - 60 mm.
  • Insertion Tensiometer LKV2 ZB9602TMKV2: Features a cylindrical ceramic cell with a tip, Ø 15 x 40 mm, overall length of approximately 160 mm, and typical insertion depth of 70 mm.
  • Insertion Tensiometer L2 ZB9602TML2: Includes a cylindrical ceramic cell with a tip, Ø 20 x 65 mm, overall length of approximately 340 mm, and typical insertion depth of 250 mm.
Functionality:
  • Tensiometer FDA 602 TM3: Measures soil moisture by identifying suction pressure, which indicates the force required by plant roots to absorb water. The device uses a porous clay tip to transfer water and create sub-pressure, which is measured in hPa.
  • Operates effectively even in dry air conditions, allowing moisture measurement in coarse or loose substrates.
  • Suction pressure measurements are not significantly affected by the salt concentration in the soil.
Technical Data:
  • Measurement range: 0 to -1000 hPa relative (negative pressure).
  • Output: 0.3 to 3.0 V.
  • Power supply: 5 V via ALMEMO® connector.
  • Includes a sensor with a 5 m cable and ALMEMO® connector.
Typical Suction Pressure Values:
  • Peat Substrates: 30 – 40 hPa (very moist), 50 – 120 hPa (moist), 150 – 200 hPa (dried), >200 hPa (dry).
  • Open Fields (intermediate grade soil): <50 hPa (saturated), 100 – 150 hPa (wet to moist), >200 hPa (start drying), 200 – 500 hPa (irrigation needed).
Note: The document reserves the right to make technical changes.
See more

Catalog excerpts

Tensiometer-1

Ceramic cell: Overall length: Insertion depth: • Measurement of soil moisture through the identification of suction pressure. The suction pressure is the force with which water is being held in the soil or is available for absorption. This is the force that must be produced by the plant roots in order for water to be absorbed. • The porous, clay tip of the tensiometer transfers water from within to the drier outer surroundings by means of capillarity, thereby, creating a sub-pressure within the sealed tensiometer tube. This sub-pressure is a measure of the moisture level and can be determined as a value or used directly to activate an electrical switch. The customary unit of measurement is hPa. • However, a tensiometer also functions in dry air as long as evaporation can take place over the porous, clay chamber. Therefore, moisture levels can be measured even in coarsegrained or very loose substrate. • Suction pressure measurements are largely independent of the salt concentration of the substrate or soil. Cylindrical, with tip, 0 20 x 65 mm approx. 340 mm typical 250 mm Typical Suction Pressure at Peat Substrates 30 - 40 hPa very moist 50 - 120 hPa moist 150 - 200 hPa dried >200 hPa dry Ceramic cell: Cylindrical, with tip, 0 15 x 40 lmn Overall length: approx. 160 mm Insertion depth: typical 70 mm Typical Suction Pressure at Open fields (intermediate grade soil) saturated wet to moist start drying Irrigation Sensor completely porous for measuring in thin layers of substrate. Moisture tension meter, electronics Sink deep: approx. 30 - 60 mm 11/2026 • We reserve the right to make technical changes. Measure range: Output: Power supply: Cable: Technical Data Measurement of soil moisture through the identification of suction pressure. 0 to -1000 hPa relative (negative pressure) 0.3 to 3.0 V Sensor with cable, length = 5 m, with ALMEMO® connector Tensiometer electronics for screwing onto the tensiometer with cable and ALMEMO® connector FDA602TM3 Standard model for use on capillary matting, for moist to moderately moist cultivation or for general measurement on moist surfaces.

 Open the catalog to page 1

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. FLAD03VL1

    1  Page

  39. FLA623

    3  Pages

  40. VLambda

    1  Page

  41. Luminance

    1  Page

  42. pH

    4  Pages

  43. Conductivity

    2  Pages

  44. CO sensor

    1  Page

  45. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.