Speed

Speed

Product catalog summary
Overview: The Rotational Speed Sensor FUA 919-3 is an optical probe designed for measuring rotational speed using a retroreflective photoelectric sensor. It calculates revolutions per minute (rpm) by evaluating the time period between two pulses, ensuring stable readings through averaging over a minimum of 500 ms.
Specifications:
  • Measuring Range: 8 to 30000 rpm
  • Resolution: 1 rpm
  • Accuracy: Up to 15000 rpm: ± 0.02% of m.v. ± 1 digit; Up to 30000 rpm: ± 0.05% of m.v. ± 1 digit
  • Detection Range: 20 to 300 mm (depending on the reflector)
  • Reference Object: Standard white 100 mm x 100 mm
  • Sensitivity: Adjustable with potentiometers
  • Type of Light: Red light 640 nm
  • Light Spot Diameter: Approximately 20 mm at intervals of 300 mm
  • Aperture Angle: Approximately 4°
  • Limit for Foreign Light: EN 60947-5-2: 10000 lux
  • Display Switching Status: LED yellow
  • Switching Frequency: < 1000 Hz
  • Ambient Temperature: –30 °C to +60 °C
  • Storage Temperature: –40 °C to +70 °C
  • Protection System: IP 67
  • No-load Current: ≤ 15 mA
  • Supply Voltage: Via ALMEMO® connector
  • Connection: Device connector M 12 x 1 including socket M 12 x 1, angled, with 1.5 meters cable and ALMEMO® connector
  • Material: Housing: Brass, nickel plated; Lens opening: PMMA
  • Dimensions: Diameter: M 12 x 1 mm, Length: 55 mm
Procedures: The sensor is applied by attaching a reflective adhesive tape to the moving part and aligning the probe with it. A yellow signal lamp indicates successful detection of the tape. Sensitivity adjustments can be made using a potentiometer to enhance operational reliability.
Calibration: DAkkS accredited calibration or factory calibration is available, meeting DIN EN ISO/IEC 17025 requirements.
Accessories: Extension cables are available in 1 meter (ZA9060VK1) and 2 meters (ZA9060VK2) lengths. The sensor package includes 5 reflective adhesive tapes and a 1.5 m connecting cable with ALMEMO® connector.
Notes: The document reserves the right to make technical changes.
See more

Catalog excerpts

Speed-1

Optical probe for measurements of rotational speed, designed as retroreflective photoelectric sensor for photoelectric detection of rotational speeds. For evaluation of the pulses, the tachometer probe is equipped with a specific frequency meter module that calculates the number of revolutions per minute from the time period between two pulses. A stable read-out is achieved by averaging over a minimum of 500 ms. Easy application: A reflective adhesive tape is attached to the moving part and the probe is aligned with it. For function control purposes a yellow signal lamp at the rear side of the probe will be on when the reflective adhesive tape is recognised. To increase the operation reliability the sensitivity can be adjusted through a potentiometer. 11/2026 • We reserve the right to make technical changes. Technical Data: Measuring range: 8 to 30000 rpm Reference object: standard white 100 mm x 100 mm Sensitivity: adjustable with potentiometers Detectable object: opaque or reflector Type of light: red light 640 nm Light spot diameter: appr. 20 mm at intervals of 300 mm Aperture angle: appr. 4 ° Limit for foreign light: EN 60947-5-2: 10000 lux Display switching status: LED yellow Supply voltage: via ALMEMO® connector Connection: Device connector M 12 x 1 including socket M 12 x 1, angled, with 1.5 meters cable and ALMEMO® connector Housing: brass, nickel plated, Lens opening: PMMA Extension cable, 1 meter long ZA9060VK1 Extension cable, 2 meters long ZA9060VK2 Rotational Speed Sensor up to 30000 rpm max., incl. 5 reflective adhesive tapes Connecting cable 1.5 m long with ALMEMO® connector FUA9193 DAkkS accredited calibration or factory calibration KU90xx rotational speed for digital sensor, see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

 Open the catalog to page 1

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Flow

    2  Pages

  33. Wind sensor

    2  Pages

  34. Comfort Index

    2  Pages

  35. Sound Level

    1  Page

  36. Moisture

    5  Pages

  37. Tensiometer

    1  Page

  38. FLAD03VL1

    1  Page

  39. FLA623

    3  Pages

  40. VLambda

    1  Page

  41. Luminance

    1  Page

  42. pH

    4  Pages

  43. Conductivity

    2  Pages

  44. CO sensor

    1  Page

  45. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.