• Universal manual simulator for simulating temperature sensors and process variables when testing measuring instruments, regulators, and other equipment • Pt100 simulation with 5 fixed resistors in 4-conductor technology. Voltage and thermocouples simulation with 15-bit D/A converter. Current simulation with 15-bit D/A converter. Frequency and pulse generator with quartz-crystal oscillator. Continuity check with settable threshold • All signals are available at the same time. • Signals can be set either manually or automatically, in step or ramp form. • All signals and all the programming can be shown on the illuminated graphics display. • Connection of peripherals via ALMEMO® clamp connectors, cable with anti-kink protective sleeve and strain relief • Power supply via battery or mains unit • Modern, compact housing - also suitable for DIN top-hat rail mounting • Option of PC-controlled operation via all ALMEMO® data cables. 11/2025 • We reserve the right to make technical changes. Technical data Accuracy Temperature drift Signal voltage -10 to +60.000 mV -3 to 10.000 V Accuracy Temperature drift Time constant Thermocouples CJ - temperature Signal current 0 to 20.0 mA Accuracy Temperature drift Time constant Operating range Operating temperature (Storage temperature Ambient humidity signal frequency Pulse width Accuracy Pulse range Period Pulse Accuracy Continuity Threshold Power supply Battery Current consumption Voltage and Current output with illumination type K, N, T, J (ITS90) resolution: 0.1 K type S, R, B (ITS90) resolution: 1 K ± 0.05 % of measured value ± 0.05 % final value -30..100 °C_ 15-bit DAC electr. isolated load < 500 D ± 0.05 % of measured value ± 0.05 % of final value 20 ppm / K 100 ps 3 Mignon Alcaline (Battery): approx. 30 mA approx. 80 mA + 4 x IOUT, approx. 40 mA additional 7 silicone keys (4 soft-keys) (LxWxH) 127 x 83 x 42 mm ABS (-10 to +70 °C), 290 g -10 ... +50 °C -20 ... +60 °C)

Displays (examples) * DEUICE CONFIGURATION * Device address: 00 Baud rate: SGOOBd Language: english Illumination: )/ duration: 20s contr. 50* UBat: 4.5U Main menu Device configuration PI: Output TC NiCr-Ni type K Function stePs ndividually P3:0utput Frequency 4000Hz Function: stePs individually Frequency pulse generator PI: OutPut 0 - 100 Function stePs automatically Accessories Order no. ALMEMO® clamp connector (for Pt100 or universal use) ALMEMO® connecting cable with 2 banana plugs and 2 test probes USB data cable, electrically isolated V24 data cable, electrically isolated Fixture for top-hat...