Temperature Pt100 temperature sensors for special applications in humid conditions up to 150 / 250 °C High-grade Pt100 resistance sensor For measuring operations in very humid atmospheric conditions Operative over a wide range of temperatures Pt100 temperature sensors for applications in laboratories and medical engineering Technical data Accuracy Protective tube Especially suitable for measuring temperatures in autoclaves, sterilizing units, high-temperature steam applications, vacuum applications, and freeze drying units Pt100 film resistor, class A* Stainless steel, diameter 3 mm, length 20 mm -30 to +150 °C PFA, length 5 m maximum 3.0 bar IP69K Pt100 with resolution 0.01 K. Operative range Cable Working pressure Protective class ALMEMO® plug Variants Pt100 sensor, cable length = 5 m, ALMEMO® plug Pt100 temperature sensors for industrial applications in air-conditioning / heat cabinets Technical data Accuracy Protective tube Especially suitable for measuring temperatures in air-conditioning / heat cabinets with high atmospheric humidity Operative over a wide range of temperatures Pt100 film resistor, class A* Stainless steel, diameter 4 mm, length 50 mm -100 to +250 °C PFA IP68 Pt100 with resolution 0.01 K. Operative range Cable Protective class ALMEMO® plug Variants Pt100 sensor, cable length = 5 m, ALMEMO® plug Pt100 sensor, cable length = 10 m, ALMEMO® plug 11/2025 • We reserve the right to make technical changes. Digital Pt100 temperature sensor with ALMEMO® D7 connector • The digital ALMEMO® D7 measuring plug works with its own built-in AD converter. The linearization of the Pt100 characteristic curve is calculated according to DIN IEC 751 (no approximation method). • The overall accuracy of the measurement is independent of the ALMEMO® V7 display unit/data logger. The complete measuring chain, consisting of the Pt100 sensor and the connected ALMEMO® D7 measuring plug, can be calibrated. Increased accuracy is achieved during calibration by a multi-point adjustment of the temperature sensor. • For all ALMEMO® V7 measuring instruments / data loggers Technical data for the sensor: see above Technical data for the ALMEMO® D7 measuring plug: see chapter 2 Variants Digital Pt100 sensor, cable length = 5 m, with ALMEMO® D7 connector Digital Pt100 sensor, cable length = 10 m, with ALMEMO® D7 connector Digital double Pt100 sensor: 2 digital Pt100 sensors, cable length 5 m each, mounted on 1 ALMEMO® D7 double connector Order no. FPD740ST0050S01KL0050 Order no. FPD740ST0050S01KL0100 Order no. FPD740ST0050S21KL0050 Accessories: PTFE tube (high emissivity), open on both sides, length approx. 70 mm, for probe diameter 4 mm. * Range of validity see beginning of chapter DAkkS accredited calibration or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device), see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in