Catalogs >
Ahlborn Mess- und Regelungstechnik GmbH >
Pt100 cable sensor

Pt100 cable sensor
1Pages

Catalog excerpts

Inexpensive resistance-based temperature sensors. For immersion measurements in air and gases. Rigid protective tube made from stainless steel A wide variety of cable variants. Operating temperature (depending on variant) -40 to +400°C. f Please note: Only for usage in a dry environment With FEP / FEP cable (black), Diameter Length A longer cable is available as an option Total length 5 m OPK03L0050 Temperature Technical data Accuracy: Pt100 film resistor, class B* (no other variants in stock) Protective tube: Diameter, length see Variants, stainless steel 1.4301 Junction of protective tube / connecting cable: _Direct, hard-crimped for dry uses Cables: Length = 1.5 meters, Other lengths are available as options. Cable diameter is never larger than the diameter of the protective tube. Operating temperature: see variants, Always for whole sensor (i.e. sensor tip and cable) ALMEMO® connector: resolution 0.01 K. Note: For temperature sensors suitable for usage in humid environments (e.g. climatic chamber) see page 07.21 With FEP / silicone cable (red), Operative range -40...+200°C: Diameter Length Order no. A longer cable is available as an option Total length 5 m OPK01L0050 10/2016 • We reserve the right to make technical changes. * Range of validity see page 07.03 Cable with glass-fiber / glass-fiber / VA wire shielding, Operative range -40...+400°C: Diameter Length Order no. A longer cable is available as an option Total length 5 m OPK06L0050 DAkkS or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device) (see chapter Calibration certificates) DAkkS calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

Open the catalog to page 1