TemperaturePt100 cable sensor Inexpensive resistance-based temperature sensors. For immersion measurements in air and gases. Rigid protective tube made from stainless steel A wide variety of cable variants. Operating temperature (depending on variant) -40 to +400 °C. Accuracy: PtlOO film resistor, class B1 _(no other variants in stock)_ Protective tube: Diameter, length see Variants, Junction of protective tube / connecting cable: _Direct, hard-crimped for dry uses Cables: Length = 1.5 meters, Other lengths are available as options. Cable diameter is never larger than _the diameter of the protective tube. Operating temperature: see variants, Always for whole sensor _(i.e. sensor tip and cable)_ ALMEMO® connector: resolution 0.01 K. 11/2025 • We reserve the right to make technical changes. Only for usage in a dry environment You can find temperature sensors suitable for usage in humid enviromnents (e.g. climatic chamber) a few pages earlier Diameter Length A longer cable is available as an option With FEP / silicone cable (red) Operative range -40...+200 °C: Diameter Length Order no. A longer cable is available as an option Cable with glass-fiber shielding Operative range -40...+400 °C: Diameter Length A longer cable is available as Total length 5 m Total length 10 m / glass-fiber / VA wire Order no. Range of validity see beginning of chapter DAkkS accredited calibration or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device), see chapter Calibration certificates^ DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.