Catalogs >
Ahlborn Mess- und Regelungstechnik GmbH >
Pressure sensors FDA602L

Pressure sensors FDA602L
1Pages

Catalog excerpts

Pressure • Compact pressure sensors for industrial applications in liquid and gaseous substances. • Piezo-resistive, flexibly suspended silicone measuring cell in an oil-filled, all-welded special steel enclosure. • The stable mechanical construction provides a reliable protection for the measuring cell against the test substance and immunes it against pressure peaks and vibrations. • Available with three calibrations. Relative pressure: Pressure related to the environmental press. Absolute pressure: Pressure related to vacuum (0 bar) Overpressure: Pressure related to atm. pressure at manufacturing (approx. 1bar). Technical Data: Overload Two times final value Output signal Power supply 6.5 to 15 VDC, consumption <4 mA via ALMEMO® connector Operating temperature Total error range 0 to +50 °C ±1.0 % of final value -10 to +80 °C ±1.5 % of final value (linearity + hysteresis + reproducibility + temperature coefficients + zero-point + range tolerance) Pressure terminal male thread G1/4” membrane not flush with front Nominal conditions Protective class Accuracy class ±0.5 % of final value (linearity + hysteresis + reproducibility) Quick-release coupling nominal width 5 internal thread G1/4” Material in contact with medium Stainless steel DIN 1.4404/1.1135 External seal Viton nominal width 7,2 internal thread G1/4” New: Measurement of pressure peaks and fast pressure changes with digital ALMEMO® D7 measuring plugs, see page10.03. PTFE sealing tape, -200 to +260 °C, width 10 mm, thickness 0.1 mm, roll of 12 meters Quick-release coupling, nominal width 5, up to 35 bar Connection internal thread G1/4“, brass Quick-release coupling, nominal width 7.2, up to 35 bar connection internal thread G1/4“, brass Types: including ALMEMO® cable 1.5m long Measuring ranges relative pressure: up to 2.5 bar FDA602L3R up to 5 bar FDA602L4R up to 10 bar FDA602L5R Measuring ranges absolute pressure: up to 2.5 bar FDA602L3A up to 5 bar FDA602L4A up to 10 bar FDA602L5A Measuring ranges overpressure: up to 25 bar FDA602L2U up to 50 bar FDA602L3U up to 100 bar FDA602L4U up to 500 bar FDA602L6U Pressure transducer for measuring the temperature of refrigerants see page 10.08. DAkkS or factory calibration KD9xxx pressure for sensor or measuring chain (sensor + device) (see chapter Calibration certificates). DAkkS calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025. 10/2016 • We reserve the right to make technical changes.

Open the catalog to page 1