Pressure sensors FDA602L

Pressure sensors FDA602L

Product catalog summary
Overview: The document describes compact pressure sensors designed for industrial applications involving liquid and gaseous substances. These sensors utilize a piezo-resistive, flexibly suspended silicone measuring cell housed in an oil-filled, all-welded special steel enclosure.
Specifications:
  • Mechanical Construction: Provides protection against test substances, pressure peaks, and vibrations.
  • Calibration Types: Available in relative pressure, absolute pressure, and overpressure calibrations.
  • Overload Capacity: Two times the final value.
  • Output Signal: 0.2 to 2.2 V.
  • Total Error Range: Varies with temperature, from ±1.0% to ±1.5% of the final value.
  • Response Time: Less than 5 ms for 0 to 99% response.
  • Nominal Conditions: 22 °C ±2 K, 10 to 90% RH, non-condensing.
  • Power Supply: 6.5 to 15 VDC, consumption less than 4 mA via ALMEMO® connector.
  • Operating Temperature: -40 to +100 °C.
  • Pressure Terminal: Male thread G1/4”, membrane not flush with front.
  • Material Contact: Stainless steel DIN 1.4404/1.1135, external seal Viton.
  • Weight: Approximately 50 g.
  • Protective Class: IP 65.
Accessories:
  • PTFE sealing tape, suitable for temperatures from -200 to +260 °C.
  • Quick-release couplings available in nominal widths of 5 and 7.2, up to 35 bar, with internal thread G1/4”, made of brass.
Calibration: DAkkS accredited calibration or factory calibration available, meeting DIN EN ISO/IEC 17025 requirements.
Measuring Ranges:
  • Relative Pressure: 2.5 bar, 5 bar, 10 bar.
  • Absolute Pressure: 2.5 bar, 5 bar, 10 bar.
  • Overpressure: 25 bar, 50 bar, 100 bar, 500 bar.
Additional Information: Pressure transducers are available for measuring the temperature of refrigerants. Technical changes may be made without notice.
See more

Catalog excerpts

Pressure sensors FDA602L-1

Overload Two times final value Total error range (linearity + hysteresis + reproducibility + temperature coefficients + zero-point + range tolerance)_ Compact pressure sensors for industrial applications in liquid and gaseous substances. Piezo-resistive, flexibly suspended silicone measuring cell in an oil-filled, all-welded special steel enclosure. The stable mechanical construction provides a reliable protection for the measuring cell against the test substance and immunes it against pressure peaks and vibrations. Available with three calibrations. Relative pressure: Pressure related to the environmental press. Absolute pressure: Pressure related to vacuum (0 bar). Overpressure: Pressure related to atm. pressure at manufacturing (approx. 1 bar). consumption <4 mA via ALMEMO® connector Pressure terminal male thread G1/4” membrane not flush with front Material in contact with medium Stainless steel DIN 1.4404/1.1135 External seal Viton 11/2026 • We reserve the right to make technical changes. Quick-release coupling nominal width 5 internal thread G1/4” nominal width 7.2 internal thread G1/4” Accessories PTFE sealing tape, -200 to +260 °C, width 10 mm, thickness 0.1 mm, roll of 12 meters Quick-release coupling, nominal width 5, up to 35 bar Connection internal thread G1/4“, brass Quick-release coupling, nominal width 7.2, up to 35 bar Connection internal thread G1/4“, brass Types: including ALMEMO® cable 1.5 m long Measuring ranges relative pressure: Measuring ranges absolute pressure: Measuring ranges overpressure: Pressure transducer for measuring the temperature of refrigerants see FDA 602 LxAK DAkkS accredited calibration or factory calibration KD9xxx pressure for sensor or measuring chain (sensor + device), see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

 Open the catalog to page 1

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.