Compact pressure sensors for industrial applications in liquid and gaseous substances. Piezo-resistive, flexibly suspended silicone measuring cell in an oil-filled, all-welded special steel enclosure. The stable mechanical construction provides a reliable protection for the measuring cell against the test substance and immunes it against pressure peaks and vibrations. Available with three calibrations. Relative pressure: Pressure related to the environmental press. Absolute pressure: Pressure related to vacuum (0 bar). Overpressure: Pressure related to atm. pressure at manufacturing (approx. 1 bar). Overload Two times final value Total error range (linearity + hysteresis + reproducibility + temperature coefficients + zero-point + range tolerance)_ consumption <4 mA via ALMEMO® connector Pressure terminal male thread G1/4” membrane not flush with front Material in contact with medium Stainless steel DIN 1.4404/1.1135 External seal Viton Quick-release coupling nominal width 5 nominal width 7.2 internal thread G1/4” internal thread G1/4” 11/2025 • We reserve the right to make technical changes. PTFE sealing tape, -200 to +260 °C, width 10 mm, thickness 0.1 mm, roll of 12 meters Quick-release coupling, nominal width 5, up to 35 bar Connection internal thread G1/4“, brass Quick-release coupling, nominal width 7.2, up to 35 bar Connection internal thread G1/4“, brass Types: including ALMEMO® cable 1.5 m long Measuring ranges relative pressure: Measuring ranges absolute pressure: Measuring ranges overpressure: Pressure transducer for measuring the temperature of refrigerants see FDA 602 LxAK DAkkS accredited calibration or factory calibration KD9xxx pressure for sensor or measuring chain (sensor + device), see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.