Pitot Tubes

Pitot Tubes

Pitot Tubes

Product catalog summary
Overview: This document provides technical specifications and guidelines for the ALMEMO® pressure measuring connector FDA 602 S1K / S6K, used for air flow and differential pressure measurement with Pitot tubes.
Specifications:
  • Pressure Range: Barometric pressure from 700 to 1100 mbar.
  • Accuracy: Differential pressure accuracy is ±0.5% of the final value.
  • Temperature: Nominal temperature is 25°C with a compensated range from 0 to +60°C.
  • Dimensions: 74 x 20 x 8.8 mm.
  • Materials: Aluminum, nylon, silicone, silica gel, brass.
Features:
  • Compact design for flow measurement with Pitot tubes.
  • Direct plug-in capability to measuring instruments.
  • Automatic atmospheric pressure compensation.
Calibration: DAkkS accredited calibration available, compliant with DIN EN ISO/IEC 17025 standards.
Usage Notes:
  • Compatible with ALMEMO® devices, though adjacent input sockets may be partially covered.
  • Wind tunnel temperature compensation available for precise measurements.
Accessories:
  • Connecting and extension cables available.
  • Silicone hoses in various lengths and colors.
Pitot Tubes:
  • Available in various materials and sizes, suitable for different temperature ranges and dust conditions.
  • Prandtl Pitot tubes with hemispheric heads for dynamic and static pressure measurement.
Technical Data for Pitot Tubes:
  • Head and shaft diameters vary from 3 mm to 20 mm.
  • Maximum operating temperatures range from 150°C to 700°C.
  • Materials include nickel-plated brass and chrome-nickel steel.
See more

Catalog excerpts

Pitot Tubes-1

Differential pressure and Pitot tube measurement Measuring connector FDA 602 S1K / S6K Measuring connector FDA602S1K / S6K Overload capacity Maximum three times final value Max. common mode pressure 700 mbar Accuracy differential pressure ±0.5 % of final value (zero-point adjusted) in range 0 to positive final value Temperature drift < ±1.5 % of final value Compensated temp. range 0 to +60 °C • Pressure measuring connector in compact design for flow measurement with Pitot tubes • Fitting for connecting hose between Pitot tube and pressure measuring connector • Pressure measuring connector can be plugged directly onto the measuring instrument. Hose terminals 0 5 mm, 12 mm long Sensor material aluminum, nylon, silicone, 11/2026 • We reserve the right to make technical changes. On ALMEMO® devices to obtain precise measured results in m/s the wind tunnel temperature can be entered in the -50 to +700 °C range for compensation purposes. Advisory note when used in conjunction with ALMEMO® 2890, 5690, 5790, 8590, 8690, 510, 809: The new ALMEMO® pressure measuring connector is very slightly higher (8.8 mm). As a result adjacent input sockets on the ALMEMO® device may be partly covered. However, the 1st input socket can always be used without restriction. Or, alternatively, the ALMEMO® pressure ! measuring connector can be plugged in at any input socket using connecting cable ZA9060AK1. ALMEMO® pressure measuring connector for barometric pressure 700 to 1100 mbar, without pressure terminal sleeve Technical data see chapter Pressure FDAD12SA including programming for automatic atmospheric pressure compensation (comment *P) OA9000PK (variant with pressure terminal sleeve, see chapter Pressure) Connecting cable, 0.2 meters Extension cable, 2 meters 1 set of silicone hoses black / colorless, 2 meters Silicone hose, black, per meter Silicone hose, colorless, per meter Variants (including manufacturer’s test certificate) Order no. (including one set of silicone hoses, 2 meters) Measuring ranges ±1250 Pa, Differential pressure (1 to 40 m/s), Measured variables m/s, Pa, Measuring connector, independent of position FDA602S1K Measuring ranges ±6800 Pa, Differential pressure (2 to 90 m/s), Measured variables m/s, Pa, Measuring connector, independent of position FDA602S6K DAkkS accredited calibration or factory calibration KV90xx, air flow, and KD90xx, pressure, for sensor or measuring chain (sensor + device), see chapter „Calibration certificates“ DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

 Open the catalog to page 1
Pitot Tubes-2

Pitot Tubes for Differential Pressure Sensors FDA602 • Prandtl Pitot tubes with hemispheric head. • For measuring the dynamic pressure, the tip of the Pitot tube has an opening of 0.3 d. • For measuring the static pressure, a total of 12 holes with 0.1 d 0 have been arranged at a distance of 3 d. • Pitot tube coefficient 1.0. Accuracy typ. ±0.5 % ! ALMEMO® devices that have an option for entering factors can also be used to perform wind velocity measurements with cylindrical probes, according to VDEH. The cylindrical Pitot tubes have a probe-related coefficient of 1.7. By entering a factor of...

 Open the catalog to page 2

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Force

    3  Pages

  29. Displacement

    2  Pages

  30. Vibration

    2  Pages

  31. Speed

    1  Page

  32. Flow

    2  Pages

  33. Wind sensor

    2  Pages

  34. Comfort Index

    2  Pages

  35. Sound Level

    1  Page

  36. Moisture

    5  Pages

  37. Tensiometer

    1  Page

  38. FLAD03VL1

    1  Page

  39. FLA623

    3  Pages

  40. VLambda

    1  Page

  41. Luminance

    1  Page

  42. pH

    4  Pages

  43. Conductivity

    2  Pages

  44. CO sensor

    1  Page

  45. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.