15 Water analysispH One-Bar Measuring Chain FY96PHEK Applications: manual measurements e.g. swimming pools, drinking water ... pH range: 1 ... 12 Reference (Electrolyte): KCl containing gel Operating range: 0 ... 60 °C Shaft length: 120 ±3 mm Operating pressure: unpressurised Shaft diameter: 12 mm (polycarbon) Conductivity: > 150 pS / cm Electrode head: plug head SN6 Diaphragm type: ceramic pH-one-bar measuring chain pH 1 ... 12, 0 ... 60 °C for unpressurised operating FY96PHEK Generally for water with solid content (turbid water), water with low conductivity, e.g. from reverse osmosis. Municipal and industrial wastewater, cooling water, industrial water, water in chemistry and paper production. 11/2025 • We reserve the right to make technical changes. Technical Data pH range: 1 ... 12 Diaphragm type: PTFE ring diaphragm Reference (Electrolyte): KCl-containing polymer Shaft diameter: 12 mm (glass) Screw connection: thread PG13.5 Electrode head: plug head SN6 Type Order no. pH-one-bar measuring chain pH 1 ... 12; 0 ... 80 °C, up to 6 bar FY96PHER Technical Data Operating pressure: unpressurised Diaphragm type: ceramic only for clear water, waste water, cooling water, chemically contaminated water. Reference (Electrolyte): KCl solution, refillable Shaft diameter: 12 mm (material: glass) Screw connection: thread PG13.5 Electrode head: plug head SN6 pH-one-bar measuring chain pH 1 ... 12, 0 ... 80 °C for unpressurised operating FY96PHEN2

pH Insertion Electrode FY96PHMEE1 Operating range: pH 1 ... 11 / 0 ... 80 °C max. pressure: unpressurized operation Diaphragm / Reference: no diaphragm / polymer Piercing tip: 0 approx. 6 mm, Penetration depth approx. 25 mm Hand measurements, for piercing solid and semi-solid samples such as meat, cheese, fruit, vegetables. Shaft: 0 8 / 12 mm, length approx. 90 mm (incl. tip), material glass Electrical connection: plug head S7 pH Insertion Electrode, for food FY96PHMEE1 max. pressure: unpressurized operation Diaphragm / Reference: no diaphragm / polymer Piercing tip: 0 approx. 6 mm, Penetration...

Water analysis Applications: Transducer cables are available for all popular electrodes with a coaxial connector. To avoid the measuring signal being corrupted by the measuring instrument itself an extremely high-impedance amplifier is integrated in the ALMEMO® connector on the connecting cable. Transducer cable with various electrodes Technical Data Transducer High-impedance measuring amplifier (>500 Gohm), integrated in the ALMEMO® connector Electrode terminal For plug-on head S7/SN6 or SMEK (see variants) ALMEMO® connecting cable with transducer (ALMEMO® connector, spray-coated) For probes...

Water analysisDigital connection cable for pH and redox probes ZYD7 10-AKx and ZYD7 40-AKx, with ALMEMO® D7 plug • Digital ALMEMO® D7 connection cable.• Galvanically isolated from the measuring instrument.• Temperature dependence of the probe can be compensated manually or automatically.• Comparison of the pH probe at three points.Technical data and functionsDigital connection cable. The voltage of the probe is measured by an A/D converter integrated into the ALMEMO® D7 plug. Extension cables and the measuring device itself have no influence on the measurement accuracy. It is possible to operate...