ALMEMO® PC connection using USB data cable ZA 1919 DKU RS232 data cable, type ZA 1909 DK5 • ALMEMO® USB data cable for data connection between an ALMEMO® device and a PC with a USB interface • ALMEMO® RS232 data cable with a DSUB socket for data connection between an ALMEMO® device and a PC with a COM interface • ALMEMO® optic fiber cable (RS232) for absolute electrical isolation and extensive protection against lightning. Types: USB data cable, electrically isolated, maximum 921.6 kbaud, cable length 1.5 meters, including CD with Windows driver As above but cable length 5 meters RS232 data cable electrically isolated, max. 115.2 kbaud, Current consumption: approx. 1 mA, cable length: 1.5 m As above, but cable lengths 5 m / 10 m / 15 m RS232 data cable with optic fiber, max. 115.2 kbaud, Cable length 1.5 m Longer optic fiber (up to 50 m) for interiors, Duplex plastic 2.2 x 4.3 mm, per meter 11/2025 • We reserve the right to make technical changes. ALMEMO® PC connection using Ethernet data cable ZA 1945 DK For connecting almost any ALMEMO® measuring instrument to an Ethernet PC network. Linking up to the Internet now possible. Terminal operation using our ALMEMO® Connect software, available free-of-charge. Measured data acquisition via several Ethernet modules using our WinControl software. (Version SW5600WC2 and above, see chapter Software). Technical data Ethernet: Socket RJ45 (10/100 base-T) Automatic switchover 10 / 100 MHz ALMEMO® ALMEMO® connector for socket A1 Baud rate standard 9600 bd, max. 115.2 kbd (can be changed via Device Installer and browser) Power supply 12 V DC via measuring instrument (suitable mains supply unit recommended) Current consumption <60 mA (10 MHz), <90 mA (100 MHz) Patch cable RJ45, plug / plug, 2 meters ZB1904PK2 Ethernet data cable, RJ45 socket on ALMEMO® connector, cable length 1.5 meters ZA1945DK ALMEMO® USB adapter cable length 1.5 meters for connecting an ALMEMO® D6 sensor to the USB port on a PC (power supply via USB) ZA1919AKUV

! The device network will be blocked if the measuring instrument fails to operate. No further peripheral devices can be connected (analog output, alarm relay etc.) • Especially suitable for short distances and mobile measuring setups. • Up to 100 ALMEMO® measuring instruments can be networked. • Devices can be quickly and easily interconnected and networked. • Low power consumption (approx. 1 mA) without additional power supply. • You can easily assemble the network cable yourself, up to 50 m in length, using just two single network connectors ZA1999FS5 (a couple) and one four-wire cable. Types...