Technical Data Measuring method: capacitive Measuring range (moisture): 0 to 50 % moisture, referenced to mass Measuring range (material): mineral construction materials 0 to 20 %, moisture woods 0 to 50 %, moisture paper and cardboard 0 to 20 % moisture Housing: plastic handle with integrated electronics Terminal block: aluminium/plastic 20 x 25 x 70 mm • Moisture sensor for determination of the moisture content in mineral construction materials, wood and cardboard. • Indirect measurement of the moisture through the determination of the dielectric constant. • Capacity measurement through a high frequency electromagnetic field, which penetrates the material in a non-destructive way. Measuring comb: stainless spring steel 0.5 mm, 70 x 35 mm Current consumption: approx. 7 mA 11/2025 • We reserve the right to make technical changes. Accessories Order no. Test block for min. construct. materials ZB9696PE05 Test block for wood, paper, cardboard ZB9696PE30 Moisture sensor for determination of the moisture content in wood. Indirect moisture measurement according to the principle of conductivity. Determination of the moisture content in the material through the dependence of the electrical resistance on the moisture. Measuring method: principle of conductivity Measuring range: 7 to 30 % moisture, Housing: plastic handle Measuring tips: stainless steel, uninsulated PTFE-insulated measuring tip - helps avoid measuring errors in the event of surface moisture, 1 piece (2 pieces are needed per probe) ZB9636MFST Wood moisture probe FHA636MF

Moisture in materialsMoisture content sensor - for wood, for stationary measuring operations FHA696MFS1 Capacitive sensor for applying onto the wood‘s surface • Moisture content sensor for comparative measurement of moisture in wood materials • The capacitive sensor with the measuring electronics is completely integrated in the damp-proof sensor housing. Plugin ALMEMO® connecting cable • This device is designed for stationary installation and long-term monitoring e.g. of wooden parts of buildings, roof structures (with laminated beams). • It is also suitable for data logger operation in energy-saving...

• Moisture content sensor for comparative measurement of moisture in wood materials • Two hanger bolts are screwed into the wood surface and connected via measuring lines to the measuring electronics in the damp-proof sensor housing. • The sensor housing with the integrated temperature sensor is also fixed in position on the wood surface. • Plug-in ALMEMO® connecting cable • The material1 s moisture content is measured indirectly by determining its electrical conductivity, which is moisture-dependent. • It is also temperature-dependent. However, the displayed moisture value is automatically temperature-compensated...

Moisture in materialsMoisture content sensor - for wood, for stationary measuring operations FHA 636-MF10 Conductivity measurement with measuring tips that can be screwed into the wood. Interval operation for long-term measurements. • Wood moisture probe for long-term measuring • Switched measuring current (intermittent mode) prevents salinization or dehydration of the material. • For long-term monitoring of wooden parts of buildings (e.g. roof structures with laminated beams) ! Operation with the device in SLEEP-mode is not possible. 11/2025 • We reserve the right to make technical changes....

Measuring method: detection of water Meas. values: <10 % no water Housing: plastic handle 40 mm 0, 130 mm long Electrodes: stainless steel Electrode types: uninsulated with rounded tip: 200 mm long, 3 mm 0 uninsulated with sharp-edged tip: 50 mm long, 3 mm 0 spring steel strap: 200 mm long, 6 mm wide, 0.5 mm high • Water detection probe for instant detection of uncombined water. • Particularly suitable for construction applications, especially in locations that are difficult to check visually, e.g. at sealing joints, under cement floors etc. • Indirect moisture measurement according to the principle...