Catalogs >
Ahlborn Mess- und Regelungstechnik GmbH >
Moisture Sensor FHA 696 MF

Moisture Sensor FHA 696 MF
4Pages

Catalog excerpts

Technical Data Moisture sensor for determination of the moisture content in mineral construction materials, wood and cardboard. Indirect measurement of the moisture through the determinati- Capacity measurement through a high frequency electromag- netic field, which penetrates the material in a non-destructive Measuring method: Measuring range (moisture): 0 to 50% moisture, Measuring range (material): mineral construction materials 0 to 20%, moisture paper and cardboard 0 to 20% moisture plastic handle with integrated electronics Terminal block: Measuring comb: stainless spring steel 0.5mm, 70 x 35mm Nominal temperature: Operative range: Storage temperature: Signal output: Power supply: Current consumption Test block for min. construct, materials Test block for wood, paper, cardboard Moisture sensor Wood moisture probe FHA 636 MF Hand-held probe for mobile test measurements Technical Data Measuring method: principle of conductivity Measuring range: 7 to 30 % moisture, Housing: plastic handle Measuring tips: stainless steel, uninsulated • Moisture sensor for determination of the moisture content in • Indirect moisture measurement according to the principle of • Determination of the moisture content in the material through the dependence of the electrical resistance on the moisture. PTFE-insulated measuring tip - helps avoid measuring errors in the event of surface moisture, 1 piece (2 pieces are needed per probe) ZB9636MFST Wood moisture probe FHA636MF

Open the catalog to page 1

• Moisture content sensor for comparative measurement of moisture in wood materials • The capacitive sensor with the measuring electronics is completely integrated in the damp-proof sensor housing. Plug-in ALMEMO® connecting cable • This device is designed for stationary installation and longterm monitoring e.g. of wooden parts of buildings, roof structures (with laminated beams). • It is also suitable for data logger operation in energy-saving sleep mode (intermittent mode). • The sensor housing is quick and easy to install on the wooden surface in question. • The material‘s moisture...

Open the catalog to page 2

Moisture in materials Moisture content sensor - for wood, for stationary measuring operations FHA636MFS1 Conductivity measurement with measuring tips that can be screwed into the wood Sensor with integrated temperature sensor for automatic temperature compensation • Moisture content sensor for comparative measurement of moisture in wood materials • Two hanger bolts are screwed into the wood surface and connected via measuring lines to the measuring electronics in the damp-proof sensor housing. • The sensor housing with the integrated temperature sensor is also fixed in position on the wood...

Open the catalog to page 3

Dew Point Detector, Water Detection Probe Dew Point Detector FHA 9461 • Dew detector for determination of dew conditions. • Consisting of one temperature sensor and an integrated sensor chip with CCC dew point sensor. • Particularly suitable in building physics for control measurements and stationary installation. • The dew point detector does not provide a measuring signal but a step function: dewed (100%) / no dew (0%). Technical Data Principle of measurement: CCC sensor Signal output: scaled voltage approx. 0 to 1V Operative range: 0°C to +70°C (no ice formation, no saliferous...

Open the catalog to page 4