*mydirectindustry

Measuring ranges

Product catalog summary

Overview: This document provides detailed specifications for various measuring instruments, including sensors for temperature, electrical signals, humidity, flow, chemical probes, optical radiation, and other transducers. Each section outlines the type, measuring range, units, resolution, accuracy, and connector type.

1. Temperature Sensors:

Resistance Temperature Detectors (RTDs): Includes Pt100/Pt1000 and Ni100/1000 sensors with ranges from -200°C to +850°C, resolutions of 0.01 K to 0.1 K, and accuracy of ±0.05 K.
Thermocouples: Types include NiCr-Ni (K), Fe-CuNi (J), and others, with ranges from -270°C to +1800°C, resolution of 0.1 K, and varying accuracy.

2. Electrical and Digital Signals:

Includes millivolts, volts, amperes, ohms, frequency, and digital interfaces with specific ranges and resolutions, such as -10 mV to +55 mV with 1 µV resolution.

3. Humidity Sensors:

Capacitive humidity sensors measure relative humidity, dew-point temperature, and other parameters with resolutions of 0.1% and accuracy up to ±0.5%.

4. Flow Sensors:

Types include rotating vane and hot-wire anemometers, measuring flow speeds from 0.01 m/s to 90 m/s with resolutions as fine as 0.001 m/s.

5. Chemical Probes:

Measure conductivity, dissolved oxygen, pH, and other chemical properties with specific ranges and resolutions, such as 0 to 20 mS for conductivity.

6. Optical Radiation Probes:

Includes lux and UV measuring probes with ranges up to 260,000 lux and resolutions as fine as 0.01 lux.

7. Other Sensors and Transducers:

Includes pressure transducers, force transducers, and tachometers with specific ranges and resolutions, such as 0 to 50 kN for force transducers.

8. Function Values:

Details on differential, maximum, minimum, and average values, as well as summation over measuring points.

Note: Data may vary depending on the device, and technical changes are reserved.

Catalog excerpts

Sensor type Type Resistance temperature detectors: Pt100 / Pt1000 -1 4-wire FP Axxx Pt100 / Pt1000 -2 4-wire FP Axxx Ni100/1000 4-wire NTC type N FN Axxx NiCrSi-NiSi (N) Fe-CuNi (L) Fe-CuNi (J) Cu-CuNi (U) Cu-CuNi (T) PtRh10-Pt (S) PtRh13-Pt (R) PtRh30-PtRh6 (B) AuFe-Cr Electrical and digital signals: For measuring bridges Supply 5 V (Example) -26.0 to For potentiometers Supply 2.5 V -2.6 to Volts DC (sampling rate 1 kHz) (Example) 0 to Ampere DC (sampling rate 1 kHz) (Example) 0 to Milliamperes DC -32.0 to Pulses / measuring cycle 0 to Measuring Instruments Units Resolution Linearization Connector accuracy programming 11/2025 • We reserve the right to make technical changes. Capacitive humidity sensors: Dew-point temperature Mixture ratio Partial vapor pressure Relative humidity Dew-point temperature Mixture ratio Partial vapor pressure mbar 0.1 mbar ±0.1 mbar ±0.1 % of measured value kJ/kg 0.1 kJ/kg ±0.5 % of measured value mbar 0.1 mbar ±0.1 mbar ±0.1 % of measured value kJ/kg 0.1 kJ/kg ±0.5 % of measured value * Data may vary depending on device (see relevant device data sheet).

Open the catalog to page 1

Sensor type Type Flow sensors Rot. vane, snap-on head FV AD15-Sx (e.g.) Rotating vane Macro FV AD15-MA1 Water turbine FV AD15-WM1 Dynamic pressure sensor FD A602-S1K Dynamic pressure sensor FD A602-S6 Hot-wire anemometer FV A935-TH4 Hot-wire anemometer FV A935-TH5 Hot-wire anemometer FV A605-TA1 Hot-wire anemometer FV A605-TA5 Measuring Units Resolution Chemical probes Conductivity FY A641-LF (e.g.) 0 to 20.000 mS 0.001 mS ±0.2 % of measured value Optical radiation (Examples) Other connectable sensors / transducers (Examples) Heat flow plates FQ Axxx -260.0 to +260.0 mV 0.01 mV - Moisture content...

Open the catalog to page 2

Measuring ranges

Measuring ranges

Catalog excerpts

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures