for sensors, Supply: 5 V or direct from ALMEMO® device Frequency range: 0 to 15000 Hz (Resolution 1 Hz) Speed range: 8 to 32000 rpm (Resolution: 1 rpm) Input voltage: 6 to 40 V, square-wave via optocoupler Sensor supply: direct from ALMEMO® device (for voltage see technical data of ALMEMO® device) Option V12 _(UG = device sensor voltage)_ Types: (Cable lengths, 1.5 meters) Model Frequency Frequency Pulses / Cycle Speed Meas. Range 0.1 Hz (can, by inserting wire jumper, be switched to) Option sensor supply 12 V 11/2025 • We reserve the right to make technical changes. ALMEMO® Adapter Cable for Digital Input SignalsTypes: (cable length, 1.5 m each) 3 digital inputs, (optocoupler), for floating contacts, 5 V auxiliary voltage led out 4 digital inputs, electrically isolated (optocoupler) for external voltage, 4 to 30 V

Input connectors and adapter cables The ALMEMO universal connector ZA 9000-FS is also available with connecting cable and free ends, as adapter cable ZA9000AK. The sensor supply voltage is present on terminal U+; it is supplied by the ALMEMO® device (sensor supply voltage 5 V, can be stabilized on request). Connecting cable: 8-wire, 8 x 0.14 mm2, black, Length 1.5 m. The wiring diagram and color code of the wires are consistent for all ALMEMO® sensors and cables, so that any pin configuration can be quickly and easily identified. ZA9000AK ® ALMEMO® 10-Fold MU Connector for ALMEMO® Plug-In Boards...

Input connectors and adapter cables ALMEMO® Connector Adapter Cable, Digital Input of Third Party Device to ALMEMO® Device Type ZA 1000A KSW / ZAD 919A Kxx Existing equipment incorporating a digital interface can, thanks to our flexible ALMEMO® system, continue being used. For this purpose, we can offer you the following service: 1. We program a device type protocol for you, which matches the output interface of your device. 2. We fit the interface cable for your device with the matching ALMEMO® connector. Description: • Data acquisition from external devices with digital interface (RS232, Modbus...