Glass thermometer

Glass thermometer

Product catalog summary
Specifications:
The document describes a Pt100 glass thermometer designed for immersion measurements in liquid media at low immersion depths. It features a wire-wound, class A Pt100 sensor with an operative range from -50 to +310 °C. The measuring tip is made of tapered glass with a diameter of 3 mm and a length of 15 mm. The shaft is also glass, with a diameter of 6 mm and a total nominal length of 250 mm. The thermometer includes labeling codes for immersion depths as per ASTM specifications.

Technical Data:
- Accuracy: Pt100 wire-wound, class A
- T90 response time: 2.5 seconds
- Cable junction sleeve: Stainless steel, 8 x 40 mm
- Cable: 2 meters, FEP/silicone
- ALMEMO® connector: Resolution 0.01 K

Calibration:
The thermometer can be calibrated either through DAkkS accredited calibration or factory calibration. DAkkS calibration complies with DIN EN ISO/IEC 17025 standards.

Variants:
The thermometer is available with an ALMEMO® connector and a 2-meter FEP/silicone cable, order number FPA910.
See more

Catalog excerpts

Glass thermometer-1

Temperature Pt100 glass thermometer with immersion depths as per ASTM Operative range: For immersion measurement in liquid media at low immersion depths. Technical data Accuracy: Operative range -50 to +310 °C Glass, tapered Diameter = 3 mm, length = 15 mm Glass, Diameter = 6 mm NL= 250 mm (total nominal length) Labeling codes for immersion depths: identification rings on the shaft as per ASTM specifications (American Society for Testing and Materials) 11/2025 • We reserve the right to make technical changes. Variants Order no. Pt100 glass thermometer with immersion depths as per ASTM specifications, with ALMEMO® connector (including 2-meter FEP / silicone cable) FPA910 Cable junction sleeve: Stainless steel, 8 x 40 mm Cable exit secured with shrink-fit sleeve Cable: ALMEMO connector: Resolution 0.01 K ® * Range of validity see beginning of chapter DAkkS accredited calibration or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device), see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025

 Open the catalog to page 1

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. Trigger cable

    3  Pages

  2. RTA5-english

    1  Page

  3. RTA6-english

    1  Page

  4. Cases

    1  Page

  5. ODBC-english

    4  Pages

  6. Web server

    4  Pages

  7. PIMEX-english

    4  Pages

  8. Thermo-wires

    3  Pages

  9. FIA20-english

    2  Pages

  10. MI30-english

    2  Pages

  11. MI40-english

    2  Pages

  12. Pitot Tubes

    2  Pages

  13. Force-english

    3  Pages

  14. Displacement

    2  Pages

  15. Speed

    1  Page

  16. Flow

    2  Pages

  17. Wind sensor

    2  Pages

  18. Comfort Index

    2  Pages

  19. Sound Level

    1  Page

  20. Moisture

    5  Pages

  21. pH-english

    4  Pages

  22. Conductivity

    2  Pages

  23. CO sensor

    1  Page

  24. Certificates

    8  Pages

  25. WinControl

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.