• Wire strain gauges in four-conductor full-bridge circuit. • Control resistance for final adjustment of the measuring range. • All measuring ranges that are specified in Newton can also be supplied in kg ranges ! All ALMEMO® devices provide easy push-button • adjustment of no-load and final value. Other version: Force sensor with digital ALMEMO® D7 measuring plug, see ZKD700FS Digital sensor, can be calibrated without measuring device. High measured value resolution. Max. load limit: 150 % of final value Maximum dynamic load: 70 % of final value with axial ALMEMO® connector Drift error at permanent load: <0.07 % per 30 min Permissible lateral forces: ±60 % of fin. val. Protection system: up to 1 kN: IP 65, from 2 kN: IP 67 Accuracy for tension: <±0.1 % of fin. val. Dimensions in mm: Accuracy for tension and compression: <±0.2 % of fin. val. Nominal measuring path: <0.15 mm Options for all Force Transducers Indication of measured values with ALMEMO® devices in kg Order no. Indication of measured values OK9000K with ALMEMO® devices in N and kg 11/2025 • We reserve the right to make technical changes. Accessories Order no. Knuckle eyes with external thread M 12 (2 pcs) Order no. Knuckle eyes with external thread M 24 x 2 (2 pcs) Types (including test certificate) Order no. Measuring range 0.02 kN 0.05 kN, 0.1 kN, 0.2 kN, 0.5 kN, 1 kN, 2 kN, 5 kN or 10 kN please specify FKA0251 Factory calibration KK9xxx force (traction / thrust) for sensor or measuring chain (sensor + device), see chapter ^Calibration certificates^ Other designs are available on request Tension and compression sensor FKA 012 with male thread terminal up to 1000 kN Tension and compression sensor FKA 1563 low height, with male thread terminal up to 2 kN

Max. load limit: 150 % of final value Maximum dynamic load: 70 % of final value Cable: radial, 3 m long with ALMEMO® connector Accuracy: <±0.5 % of final value • Wire strain gauges in four-conductor full-bridge circuit. • Control resistance for final adjustment of the measuring range. • All measuring ranges that are specified in Newton can also be supplied in kg ranges. ! All ALMEMO® devices provide easy push-button • adjustment of no-load and final value. Other version: Force sensor with digital ALMEMO® D7 measuring plug, see ZKD700FS Digital sensor, can be calibrated without measuring device....

Force Compression Sensor Torque sensor Other designs are available on request Other designs are available on request Static torque sensor e.g. with square terminal 2 to 5000 Nm Compression sensor FKA 2528 inexpensive Protective class IP60 0.2 to 10 kN Compression sensor FKA 013 other measuring ranges from 10 N up to 100 kN Rotating torque sensor (slip ring) e.g. with square terminal 1 to 5000 Nm ALMEMO® input connector for measuring bridges, millivolt / volt differential Full bridges are measured in four-conductor circuits. The power supply for the bridges is provided by the ALMEMO® plug. Bridge...