1. Catalogs
  2. Ahlborn Mess- und Regelungstechnik GmbH
  3. Flyer Calibrating climatic chambers

Flyer Calibrating climatic chambers

Flyer Calibrating climatic chambers

Flyer Calibrating climatic chambers

Product catalog summary
Introduction
The document outlines the use of the ALMEMO® measuring system for calibrating climatic chambers according to the DAkkS-DKD-R 5-7 guideline. This guideline specifies the minimum requirements for calibration procedures and measurement uncertainty determination.

Guideline Overview
The DAkkS-DKD-R 5-7 guideline provides objectives, procedures, and methods for calibrating climatic chambers, focusing on temperature and humidity indicators. It is available for download from the Physikalisch-Technische Bundesanstalt website.

Calibration Objectives
The primary goal of calibration is to identify deviations between chamber indicators and actual climatological variables (temperature and humidity) within the chamber's useful volume. Calibration involves comparing these indicators with reference equipment measurements.

Calibration Methods
Calibration can be performed on an unloaded chamber or with the chamber loaded to at least 40% of its volume. The calibration focuses on the useful volume defined by measuring locations.

Calibration Procedures
For chambers up to 2000 liters, measuring points are positioned at the corners and center of the chamber's useful volume. Humidity calibration involves determining absolute humidity and dewpoint, with calculations based on air temperature distribution.

ALMEMO® Measuring System
The ALMEMO® 710 system includes a precision measuring instrument, humidity sensor, and eight temperature sensors. It calculates relative humidity and displays data on a touch screen. The system can log data internally or to an SD card, and it supports data visualization and analysis through WinControl software.

Technical Specifications
The system operates from 0 to 90°C and 10 to 100% RH, with a built-in air pressure sensor. It uses a psychrometer for humidity calculations and supports multi-point adjustments for temperature sensors.

Additional Features
The ALMEMO® system includes a data acquisition system with 20 inputs, expandable for various sensors. It provides comprehensive calibration certificates and supports automatic evaluation and protocol generation for climate cabinets.
See more

Catalog excerpts

Flyer Calibrating climatic chambers-1

Guideline DAkkS-DKD-R 5-7 The following section includes extracts from the guideline.Guideline DAkkS-DKD-R 5-7 Calibration of climatic chambers (...) The calibration of a climatic chamber determines any deviation between the values displayed by the chamber indicators and the climatological variables, air temperature and relative humidity, measured in those parts of the chamber volume provided for use or at individual points in the chamber volume. (...) The objectives of calibration are thus the following : Calibration of the indicators for temperature and relative humidity by comparison with values for air temperature and atmospheric humidity measured in the useful space using reference equipment (also specifying any such deviation and the necessary corrections. (...) (A) Calibration refers to the useful volume as spanned by the measuring locations in the unloaded climatic chamber. (...) (B) Calibration refers to the useful volume as spanned by the measuring locations in the unloaded climatic chamber. The climatic chamber can be loaded in line with the user's typical application or by filling at least 40 percent of the useful volume with test pieces. 7.1 Arrangement of measuring locations (...) For chamber volumes of up to 2000 liters the requirements regarding the number and spatial positioning of the measuring points are as per DIN EN 60068, 3-5; i.e. the measuring locations are the corner points and the spatial center of the cuboid spanning the useful volume. The calibration result is only valid for that volume spanned by the measuring points. (...) For the purpose of calibrating relative humidity in a climatic chamber subject to air circulation the absolute humidity and dewpoint Td or S frost point Tf can be determined in the center of the useful volume and the spatial distribution of relative humidity can be calculated on the basis of the measured air temperature distribution. (...) • Guideline DAkkS-DKD-R 5-7 lays down minimum requirements for the calibration procedure and for the determination of measurement uncertainties when calibrating climatic chambers. • This guideline describes inter alia the objectives, procedures, and methods of calibration, and the uncertainty components involved. • The full text of this guideline is available as a PDF document on the home page of the Physikalisch-Technische Bundesanstalt (www.ptb.de > Metrologische-Dienstleis-tungen > DKD > Publikationen) and can be downloaded free-of-charge. Ahlborn Mess- und Regelungstechnik GmbH Eichenfeldstr. 1 l 83607 Holzkirchen l Germany Tel. +49 8024 3007 0 l FAX +49 8024 3007 10 For the relative humidity, pressure, temperature, flow velocity and for electrical quantities we are DAkkS accredited calibration laboratory

 Open the catalog to page 1
Flyer Calibrating climatic chambers-2

Calibration of climatic chambers Calibration of climatic chambers Calibration of relative atmospheric humidity at nine points in the climatic chamber using precision measuring instrument ALMEMO® 710 The ALMEMO measuring system, comprising precision measuring instrument ALMEMO® 710, one humidity sensor, and eight temperature sensors, can be used to acquire all relevant measurable variables prevalent in the climatic chamber. The relative atmospheric humidity at the nine points in the climatic chamber is calculated in the ALMEMO® 710 itself. Climatic chambers can thus be calibrated in full and on...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.