Air humidityDigital sensor for measuring temperature and • Compact sensor made from stainless steel • Screw thread, for pressure pipes • Option - adapter for compressed air pipes • Capacitive digital sensor for humidity and temperature. Additionally EEPROM data storage medium in the multisensor module. • The sensor module is thoroughly adjusted. All sensor characteristic and adjustment data are stored on the data storage medium of the sensor module itself. In the process of readjusting the individual sensors, the adjustment values are directly saved on the data storage medium of the sensor module. • Every sensor module has a unique serial number saved on the humidity sensor. The serial number is either displayed in the sensor menu of the measuring instrument or in the ALMEMO® Connect software. Hence, calibrated sensor modules can clearly be assigned to the calibration certificate. • Replacement sensor modules are inexpensive: The sensor module is pluggable and can simply be exchanged on-site. Full Pressure-sealed variant up to 16 bar, with ALMEMO® D6 plug accuracy without any adjustment, especially with calibrated sensors. The ALMEMO® connecting cable and the ALMEMO® measuring instrument have no influence on the calibration. • The humidity variables are calculated from the two primary measuring channels (real measurable variables): temperature, relative humidity • Three measuring channels are programmed: temperature (°C, T, t), relative humidity (%H, RH, Uw), dewpoint (°C, DT, td). One further humidity variable can also be selected: mixture (g/kg, MH,r), absolute humidity (g/m3,AH, dv), vapor pressure (mbar, VP, e), enthalpy (kJ/kg, En, h). The configuration of the channels and the input of the system pressure for the automatic pressure compensation of the pressure dependent humidity variables is performed on the ALMEMO® V7 measuring instrument or directly on the PC using the USB adapter cable ZA1919AKUV (see chapter “ALMEMO® Network technology”). 11/2025 • We reserve the right to make technical changes. Measuring range Sensor (incl. hysteresis) Hysteresis Mechanical design Process connection Screw-fit cable gland Digital temperature / humidity sensor (including A/D converter) 0 to 98 % RH CMOSens® technology Nominal temperature +23 °C ±5 K Sensor operating pressure up to 16 bar Sensor CMOSens® technology maximum ±0.4 K at 5 to 60 °C maximum ±0.7 K at -20 to +80 °C Reproducibility typical ±0. IK ALMEMO® connecting cable PVC Length (see variants) with ALMEMO® D6 plug Refresh time 1 second for all four channels Stainless steel, diameter 12 mm Overall length approx. 77 mm PTFE sinter filter SK6 Fitted length 48 mm, Width across flats 27 Accessories Adapter for compressed air pipes ZB96467AP PTFE sinter filter (spare) ZB9600SK6 Stainless-steel sinter filter ZB9600SK8 Variants Digital sensor for temperature and humidity, filter cap PTFE, pressure-sealed variant, with fitted cable and ALMEMO® D6 plug, manufacturer’s test certificate Connecting cable, length 2 meters Connecting cable, length 5 meters Connecting cable, length 10 meters Replacement sensor element, digital, adjusted, plug-in DAkkS accredited calibration or factory calibration KH9xxx, temperature, humidity, for digital sensor, see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.