Displacement

Displacement

Displacement

Product catalog summary
Displacement Sensor, Potentiometric FWA xxx T
  • Purpose: Designed for precise displacement measurement in automatic control and metrology.
  • Features: Utilizes a pull rod with a universal joint for backlash-free operation, even with parallel and angular displacements. Includes elastomer-damped, resilient multi-finger noble metal sliding contact for reliability under high speeds, shock, or vibration.
  • Specifications: Offers high linearity and speed (up to 10 m/s), with independent linearity ranging from ±0.2% to ±0.075% depending on the model (T25 to T150). Housing lengths and mechanical strokes vary by model, with weights ranging from 140g to 220g.
  • Performance: Reproducibility of 0.002 mm, insulation resistance ≥ 10 MW, and dielectric strength ≤ 1 mA. Operates within a temperature range of –30 to +100 °C and withstands vibrations and shocks.
  • Options: Available with plug connections and digital ALMEMO® D7 measuring plug for high-resolution measurements.
Displacement Tracer, Potentiometric FWA xxx TR
  • Purpose: Suitable for direct displacement measurements, position detection, and continuous contour measurement.
  • Features: Includes a pull rod supported on both sides to handle transverse forces, with a rear limit stop for mechanical coupling with retraction systems.
  • Specifications: Independent linearity from ±0.2% to ±0.075% (TR25 to TR100), with housing lengths and mechanical strokes specified per model. Weights range from 120g to 200g.
  • Performance: Max operating frequency varies by model, with reproducibility of 0.002 mm, insulation resistance ≥ 10 MW, and dielectric strength ≤ 1 mA. Operates within a temperature range of –30 to +100 °C.
  • Options: Available with digital ALMEMO® D7 measuring plug for calibration-free operation.
See more

Catalog excerpts

Displacement-1

• Displacement transducers are suitable for direct, accurate measurement of displacements in automatic control and metrology. • The pickup of the displacement is performed by using a pull rod with a universal joint. This allows for an actuation that is free from backlash and transverse forces, even in case of parallel and angular displacements of transducer and measuring direction. • Elastomer-damped, independently resilient multi-finger noble metal sliding contact for reliable contact, even at high adjustment speed, shock or vibration. • Long life, extraordinary linearity, pull rod running on two exact bearings, very high adjustment speed of up to 10 m/s, shock and vibration resistant. ! Pre-adjusted in the factory by storing the correction va* lues in the ALMEMO® connector. The precise adjustment can be locally performed by the user with final measures after the installation. 11/2026 • We reserve the right to make technical changes. Technical Data: Other version: Displacement transducer with digital ALMEMO® D7 measuring plug, see ZWD700FS Digital sensor, can be calibrated without measuring device. High measured value resolution. Housing length (meas. A+1 mm): T25: 63 mm; T50: 88 mm Mech. stroke (meas. B ±1.5 mm): T25: 30 mm; T50: 55 mm Weight of the pull rod incl. coupling and sliding contact block: T25: 35 g; T50: 43 g Movability, ball-shaped coupling: ±1 mm parallel displacement, Operating force (horizontal): < 0.30 N Temperature coefficient: typ. 5 ppm/°C Life span: > 100 x 106 strokes Plug connection (instead of fixed connected cable), including 3 m cable with screwed round socket and ALMEMO® connector OWA071AK Working length/resolution, incl. ALMEMO® cable 2 m long 100 mm / 0.01 mm FWA100T 50 mm / 0.01 mm FWA050T included with delivery 2 tensioning clamps Z3-31 75 mm / 0.01 mm FWA075T including 4 cap screws M 4 x 10, 1 ball-shaped coupling Other designs are available on request

 Open the catalog to page 1
Displacement-2

Displacement Tracer, Potentiometric FWA xxx TR • Resistor and collector paths made from conducting plastic. • Suitable for direct measurements of displacement without a form-locking connection, position detection at stationary measuring objects, tolerance measurements and for continuous contour measurement. • The pull rod, which is supported on both sides, allows for accepting transverse forces that, for example, occur during a continuous scan of curves or spline parts. • Rear limit stop is used to provide a simple mechanical coupling of automatic retraction systems, such as pneumatic cylinders...

 Open the catalog to page 2

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Vibration

    2  Pages

  31. Speed

    1  Page

  32. Flow

    2  Pages

  33. Wind sensor

    2  Pages

  34. Comfort Index

    2  Pages

  35. Sound Level

    1  Page

  36. Moisture

    5  Pages

  37. Tensiometer

    1  Page

  38. FLAD03VL1

    1  Page

  39. FLA623

    3  Pages

  40. VLambda

    1  Page

  41. Luminance

    1  Page

  42. pH

    4  Pages

  43. Conductivity

    2  Pages

  44. CO sensor

    1  Page

  45. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.