1. Catalogs
  2. Ahlborn Mess- und Regelungstechnik GmbH
  3. Digital vane anemometers for special applications

Digital vane anemometers for special applications

Digital vane anemometers for special applications

Digital vane anemometers for special applications

Product catalog summary
Overview: The document provides detailed specifications and features of the Digital Vane Anemometer FVAD 15-H series, designed for special applications with the ALMEMO® D6 plug. These devices are used for precise air and gas flow measurements, unaffected by environmental variables.
Specifications:
  • Materials: Measuring heads and sensor shafts are made of aluminum or stainless steel.
  • Accuracy: High accuracy in flow velocity measurement, with individual adjustment and multi-point calibration stored in the ALMEMO® D6 connector.
  • Environmental Independence: Measurements are unaffected by pressure, temperature, or humidity, with programmable density compensation.
  • Construction: Robust design suitable for both mobile and stationary operations.
  • Resolution: Maximum resolution of 0.01 m/s and frequency measurement resolution of 0.01 Hz.
  • Nominal Conditions: 22 °C ±2 K, 1013 mbar.
  • Power: Supply voltage of 6 to 13 VDC with a current consumption of 8 mA.
Variants:
  • FVAD 15-H16GFAMC40: Designed for water, with an operative range of -20 to +100 °C and pressure resistance up to 3 bar. Measuring range in water is 0.06 to 10 m/s.
  • FVAD 15-H25RGAMN40: For air and gases, with direction detection, operative range of -20 to +125 °C, and pressure resistance up to 6 bar. Measuring range is ±0.4 to ±40 m/s.
  • FVAD 15-H25GEMN40T2: High-temperature variant for air and gases, operative range of -40 to +260 °C, and pressure resistance up to 10 bar. Measuring range is 0.5 to 40 m/s.
Calibration: The devices come with a DAkkS accredited calibration or factory calibration, meeting DIN EN ISO/IEC 17025 standards. New from 11/2023, the water variant includes a mandatory factory calibration certificate.
Accessories: Extension sets and other accessories are available, including digital humidity/temperature transmitters.
See more

Catalog excerpts

Digital vane anemometers for special applications-1

Air flow Digital vane anemometer FVAD 15-H for special applications, with ALMEMO® D6 plug Technical data and functions • The precision measuring heads and the sensor shaft are made of aluminum or stainless steel. • The flow velocity is measured with high accuracy. • Each vane anemometer is individually adjusted. The Multipoint adjustment is stored in the ALMEMO® D6 connector. • In practice, measurements in air and gases are unaffected by environmental variables such as pressure, temperature, or humidity. The low dependence of the measured value on density of the gas can be compensated for. The density can be programmed in the ALMEMO® D6 sensor menu in the ALMEMO® V7 device. Technical data Nominal conditions 22 °C ±2 K, 1013 mbar Connecting cable permanently fitted cable, with Lemo plug ALMEMO® adapter cable Lemo coupling cable, with ALMEMO® D6 plug Frequency measurement resolution 0.01 Hz • Several measuring heads can be used for measurements in water. • Some variants detect the direction of flows and display the measured value with an algebraic sign. • The robust type of construction is suitable for mobile measuring operations as well as for stationary measuring operations. • The ALMEMO® D6 plug measures the frequency signal of the rotating vane with high resolution. • 1 measuring channel is preprogrammed (ex works): Flow velocity (m/s, v). Multi-point adjustment sensor specific, saved within the ALMEMO® D6 plug of the adapter cable Refresh rate 0.5 seconds for all channels Averaging period 2 seconds, programmable from 2 General features for the ALMEMO® D6 sensors: see chapter Data Loggers and Measuring Instruments Digital vane anemometer for water FVAD 11/2026 • We reserve the right to make technical changes. Technical data Variant: Micro, aluminum, Measured medium: water Operative range: -20 to +100 °C (including cable) Pressure resistance: up to 3 bar overpressure Measuring range: in water: 0.06 to 10 m/s Accuracy: ± (+0.5 % of final value sensor + 1.0 % of measured value) specific multi-point adjustment Type of rotating vane: MC40GFA, aluminum Measuring head: Sensor shaft: Aluminum, 0 16 mm Sensor length: 163 mm (dimension C) Cable exit: Thread M 14 x 1.5 (dimension IG) ! New from 11/2023 for impeller for water: Supplied with factory calibration certificate (mandatory): Calibration with medium water at 6 calibration values in the measuring range of the sensor, incl. multi-point adjustment of the sensor. Extension set 0 16 mm, stainless steel, 3 pipes 350 mm each. 3 O-rings (material: FPM75) ZV9915H16VR3 Other accessories: see digital humidity / temperature transmitter MH8D46C Digital vane anemometer for water, up to 10 m/s (water), up to 100 °C, integrated fixed cable, adapter cable with ALMEMO® D6 plug. Incl. factory calibration certificate (mandatory) with medium water. FVAD15H16GFAMC40 DAkkS accredited calibration or factory calibration KV90xx, air flow, for digital sensor, see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

 Open the catalog to page 1
Digital vane anemometers for special applications-2

Digital vane anemometer with direction detection FVAD 15-H25RGAMN40 Digital vane anemometer FVAD 15-H25RGAMN40 Technical data Variant: Measured medium: Operative range: Pressure resistance: Measuring range: Type of rotating vane: Mini, aluminum, with integrated direction detection air and gases -20 to +125 °C (including cable) up to 6 bar overpressure ± 0.4 to ± 40 m/s with direction detection ± (+0.5 % of final value sensor + 1.0 % of measured value) specific multi-point adjustment MN40GA, aluminum Measuring head: Sensor shaft: Sensor length: Cable exit: Cable length: Aluminum, 0 25 mm dimension...

 Open the catalog to page 2
Digital vane anemometers for special applications-3

Air flow Digital vane anemometer, operating range up to 260 °C FVAD 15-H25GEMN40T2 Technical data Measured medium: Operative range: Pressure resistance: Measuring range: Accuracy: Type of rotating vane: Mini, stainless steel, Measuring head: -40 to +260 °C (including high-temperature cable) Sensor shaft: up to 10 bar overpressure Sensor length: ± (+0.5 % of final value sensor Cable length: + 1.0 % of measured value) specific multi-point adjustment MN40GE, stainless steel stainless steel, 0 25 mm dimension C 81 mm dimension A 0 18.2 mm dimension B 14 mm stainless steel, 0 25 mm 170 mm (dimension...

 Open the catalog to page 3

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.