1. Catalogs
  2. Ahlborn Mess- und Regelungstechnik GmbH
  3. Digital sensor for humidity FHAD46

Digital sensor for humidity FHAD46

Digital sensor for humidity FHAD46

Digital sensor for humidity FHAD46

Product catalog summary
Overview: The document provides technical specifications and features of digital sensors for measuring temperature, humidity, and atmospheric pressure, specifically focusing on the FHAD 46 series with ALMEMO® D6 plug.
Specifications:
  • Humidity Measurement: Range from 0 to 98% RH with an accuracy of ±3% RH in the range of 10 to 90% RH and ±5% RH in the range of 5 to 98% RH at nominal temperature. Response time is typically 8 seconds at +25°C.
  • Temperature Measurement: Accuracy is typically ±0.2 K at 5 to 60°C, with a maximum of ±0.7 K at -20 to +80°C. Response time is typically 20 seconds.
  • Atmospheric Pressure Measurement: Range from 700 to 1100 mbar with an accuracy of ±2.5 mbar at 23°C.
Sensor Features:
  • All sensors are integrated into a multi-sensor module with EEPROM data storage for calibration and adjustment data.
  • Each sensor module has a unique serial number for easy calibration certificate assignment.
  • Replacement sensor modules are cost-effective and can be exchanged on-site without recalibration.
  • Atmospheric pressure is measured directly at the sensor tip for automatic pressure compensation.
Technical Features:
  • Extended operating temperature range from -40 to +85°C.
  • Silicone connecting cable with lengths up to 100 meters.
  • Four measuring channels are pre-programmed: temperature, relative humidity, dewpoint, and atmospheric pressure.
Mechanical Design:
  • Sensor tube made of stainless steel with various protective caps available for different applications.
  • Variants include different sensor lengths and cable lengths, with options for wall mounting and extension tubes.
Calibration: DAkkS accredited calibration meets DIN EN ISO/IEC 17025 requirements, ensuring high accuracy and reliability.
Applications: Suitable for meteorology and room air condition monitoring, with options for high chemical resistance and severe mechanical stress environments.
See more

Catalog excerpts

Digital sensor for humidity FHAD46-1

Digital sensor for temperature, humidity, and atmospheric pressure FHAD 46-Cx Example: ALMEMO® D6-sensor FHAD 46-C41 Digital sensor for temperature, humidity, and atmospheric pressure FHAD46-Cx, with ALMEMO® D6 plug Atmospheric pressure sensor integrated in the multi-sensor module, for automatic atmospheric pressure compensation Common technical features FHAD 46-Cx • All sensors in 1 multi-sensor module: capacitive digital sensor for humidity and temperature, digital atmospheric pressure sensor. Additional EEPROM data storage medium in the sensor module. • The sensor module is thoroughly adjusted. All sensor characteristic and adjustment data are stored on the data storage medium of the sensor module itself. In the process of readjusting the individual sensors the adjustment values are directly saved on the data storage medium of the sensor module. • Every sensor module has a unique serial number saved on the humidity sensor. The serial number is either displayed in the sensor menu of the measuring instrument or in the ALMEMO® Connect software. Hence, calibrated sensor modules can clearly be assigned to the calibration certificate. • Replacement sensor modules are inexpensive: The sensor module is pluggable and can simply be exchanged on-site. Full accuracy without any adjustment, especially with calibrated sensors. The ALMEMO® connecting cable and the ALMEMO® measuring instrument have no influence on the calibration. • New: The atmospheric pressure is measured directly at the measuring point in the sensor tip. Hence, the atmospheric pressure dependent humidity variables are automatically pressure compensated. • All relevant ambient parameters are measured with just one sensor. • Humidity calculation on the basis of formulae as per Dr. Sonntag and the enhancement factor as per W. Bögel (correction factor fw(t,p) for real mixed gas systems) This substantially widens the measuring range and improves the accuracy of humidity variable calculations. • Humidity variable: Absolute humidity in g/m³ • The humidity variables are calculated from the three primary measuring channels (real measurable variables) temperature, relative humidity, atmospheric pressure • Freely selectable measurable variables Four measuring channels are programmed (at our factory). temperature (°C, T, t), relative humidity (%H, RH, Uw), dewpoint (°C, DT, td), atmospheric pressure (mbar, AP, p) Other humidity variables can also be selected. mixture (g/kg, MH, r), absolute humidity (g/m³, AH, dv), vapor pressure (mbar, VP, e), enthalpy (kJ/kg, En, h) The configuration is performed on the ALMEMO® V7 measuring instrument or directly on the PC using the USB adapter cable ZA1919AKUV (see chapter Network Technology). Common technical data FHAD 46-Cx 11/2026 • We reserve the right to make technical changes. Digital temperature / humidity sensor (including A/D converter) Operative range depending on sensor type Humidity Measuring range 0 to 98 % RH Sensor CMOSens® technology Accuracy ±3 % RH in range 10 to 90 % RH (incl. hysteresis) ±5 % RH in range 5 to to 98 % RH at nominal temperature Hysteresis typical ±1 % RH Nominal temperature +23 °C ±5 K Sensor operating pressure Atmospheric pressure Response time T63 typical 8 seconds at +25 °C, 1 m/s (without filter) Temperature Sensor CMOSens® technology Accuracy typical ±0.2 K at 5 to 60 °C maximum ±0.4 K at 5 to 60 °C maximum ±0.7 K at -20 to +80 °C Reproducibility typical ±0.1 K Response time T63 typical 20 seconds (without filter) ALMEMO® connecting cable PVC; Length (see variants) with ALMEMO® D6 plug FHAD 46-C4xAx silicone Digital atm. pressure sensor (integrated in the multi-sensor module) Measuring range 700 to 1100 mbar Accuracy ±2.5 mbar (at 23 °C ±5 K) ALMEMO® D6 plug Refresh rate 1 second for all four channels Supply voltage 6 to 13 VDC Current consumption 5 mA DAkkS accredited calibration or factory calibration KH9xxx temperature, humidity for digital sensor, see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025. Digital sensor for temperature, humidity, and atm. pressure FHAD 46-C4AG in protective all-weather housing cable length up to 100 meters with ALMEMO® D6 plug

 Open the catalog to page 1
Digital sensor for humidity FHAD46-2

Air HumidityDigital sensor for temperature, humidity, and atm. pressure FHAD 46-C4xAx Version in stainless steel, with protective cap with ALMEMO® D6 plug Technical features • Extended operating temperature range. • Silicone connecting cable. Mechanical design Sensor tube Stainless steel, diameter 12 mm Replacement multi-sensor module FH0D 46-C • Four measuring channels are programmed (at our factory). temperature (°C, T, t), relative humidity (%H, RH, Uw), dewpoint (°C, DT, td), atmospheric pressure (mbar, AP, p) Protective cap slotted, open cap, SK10 Screw-fit cable gland Splash-protected General...

 Open the catalog to page 2
Digital sensor for humidity FHAD46-3

Air HumidityDigital sensor for temperature, humidity, and atmospheric pressure FHAD 46-C2 Version in plastic, with slotted sensor cap with ALMEMO® D6 plug Replacement multi-sensor module FH0D 46-C2 Extension tube • Four measuring channels are programmed (at our factory). Dewpoint (°C, DT, td) Temperature (°C, T, t), Relative humidity (%H, RH, Uw) Atmospheric pressure (mbar, AP, p). Operative range -20 to +60 °C / 5 to 98 % RH Extension tube 0 8 mm, length 97 mm Mechanical design Plug connection 0 approx. 9 mm, IP40 General description and common technical data see FHAD 46-Cx Variants including...

 Open the catalog to page 3

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.