Digital ALMEMO® connectors

Digital ALMEMO® connectors
1 / 15 PagesView full catalog

Digital ALMEMO® connectors

Product catalog summary
Overview: This document outlines the technical specifications and functionalities of the ALMEMO® D7 and D6 digital measuring connectors, designed for high precision temperature measurement using various sensors such as thermocouples, Pt100, Pt1000, and NTC sensors. It also covers specifications for measuring AC voltage, current, and power.
1. ALMEMO® D7 Measuring Connector for Thermocouples:
  • Compatible with thermocouple types K, N, T, J, R, S, B, E.
  • Features galvanic isolation and an integrated A/D converter for precise measurements.
  • Operates with a fast conversion rate, suitable for dynamic temperature changes.
  • Ensures high accuracy with a linearization method compliant with DIN IEC 584.
  • Supports multi-point calibration for increased accuracy.
  • Measuring ranges vary by thermocouple type, e.g., type K: -200.0 to +1370.0 °C.
2. ALMEMO® D7 Measuring Connector for Pt100/Pt1000 Sensors:
  • Provides high-resolution measurements (0.01 K) up to 850 °C.
  • Linearization complies with DIN IEC 751 standards.
  • Allows for end-to-end calibration with multi-point adjustment for enhanced accuracy.
  • Operates independently with its own A/D converter and measuring rate.
3. ALMEMO® D6 Measuring Connector for Pt100 Sensors:
  • Offers a resolution of 0.01 K across a measuring range up to 400 °C.
  • Features a calculated linearization method for accuracy.
  • Supports calibration with multi-point adjustment.
4. ALMEMO® D7 Precision Measuring Connector for Pt100 Sensors:
  • Acts as a reference sensor with a resolution of 0.001 K up to 850 °C.
  • Ensures high accuracy with calculated linearization and multi-point calibration.
  • Suitable for use with ALMEMO® V7 measuring instruments.
5. ALMEMO® D6 Measuring Connector for NTC Sensors:
  • Uses Galway Steinhart coefficients for linearization, achieving high resolution (0.001 K) in the range -20 to +65 °C.
  • Accuracy is determined by the NTC sensor and the connector, independent of extension cables.
  • Supports multi-point adjustment for increased accuracy.
6. ALMEMO® Device Specifications:
  • Current consumption is approximately 4 mA.
  • High precision and resolution of 0.001 K across a measuring range of -20 to +65 °C.
  • NTC characteristic linearization using Galway Steinhart coefficients.
  • Compatible with ALMEMO® V6 and V7 instruments, including ALMEMO® 2490 and 202-S.
  • Customer-specific NTC sensors can be connected using ALMEMO® D6 plug.
7. ALMEMO® D7 Measuring Connector for Potentiometric Sensors:
  • Features an integrated A/D converter for high accuracy.
  • Operates with its own measuring rate, unaffected by the display device.
  • Supports high resolutions and fast conversion rates.
  • Voltage drop measured at potentiometer with a 2-volt reference voltage.
  • System accuracy of 0.02% ±2 digits.
8. ALMEMO® D7 Measuring Connector for Bridge Differential mV:
  • Suitable for force and torque transducers, strain gauges.
  • High resolution up to 200,000 digits or fast conversion rate.
  • Uses a full bridge with a 4-conductor circuit.
  • System accuracy of 0.02% +2 digits at 10 measurements/second.
9. ALMEMO® D6 and D7 Connectors for DC Voltage and Current:
  • Overvoltage proof and galvanically isolated up to 6 kV.
  • High resolution and fast conversion rates for dynamic measurements.
  • Compatible with ALMEMO® V6 and V7 instruments.
  • Various measuring ranges and resolutions available for different applications.
10. General Features and Options:
  • All connectors and modules are designed for high precision and adaptability.
  • Technical changes are reserved, indicating ongoing updates and improvements.
  • Environmental conditions and other specifications are detailed in general technical specifications.
11. AC Voltage, Current, and Power Measurement:
  • Both D6 and D7 modules offer two measuring channels for voltage and frequency.
  • AC current measurement supports ranges of 1.8 ARMS AC and 10 ARMS AC, with extended ranges up to 20 ARMS for short periods.
  • The D7 module includes five measuring channels for voltage, current, effective power, frequency, and performance factor cosφ, supporting power measurements up to 720 W and 8 kW.
Operational Limitations: For currents exceeding 10 ARMS, the maximum measuring period is limited to 10 minutes, after which the device must cool down to room temperature.
Compatibility: The D7 module is compatible with ALMEMO® V7 measuring instruments, while the D6 module is compatible with both V6 and V7 instruments.
Additional Notes: The document reserves the right to make technical changes and emphasizes the importance of adhering to specified operational limits to ensure device longevity and accuracy.
See more

Catalog excerpts

Digital ALMEMO® connectors-1

Digital ALMEMO® D7 measuring connector for thermocouple sensors of type K, N, T, J, R, S, B, E Measure dynamic temperature changes with up to 100 measurement operations per second. One single connector for different thermocouple types (programmable). Optimal linearization accuracy of the thermocouple characteristic by calculation methods as per the DIN IEC 584. Increased accuracy thanks to multi-point adjustment of the thermocouple sensor during calibration. For current measuring instruments ALMEMO® V7, ALMEMO® 202-S, 204, 104, 710, 510, 809. Technical data and functions • The digital ALMEMO® D7 measuring connector for thermocouples can be used for a variety of thermocouple types. Once connected, the thermocouple type is programmed via the ALMEMO® V7 measuring instrument. • The range for thermocouple type E. For use at lowest temperatures. • The thermocouple is connected via 2 screw terminals integrated in the measuring connector. Every measuring connector has an integrated temperature sensor directly in the screw terminals for measurement and automatic compensation of the cold junction temperature. • The input of the ALMEMO® D7 measuring connector is galvanically isolated from the ALMEMO® V7 measuring instrument. Therefore the connected thermocouple sensor is galvanically isolated from the other connected ALMEMO® sensors as well. • The digital ALMEMO® D7 measuring connector operates with its own integrated A/D converter. The linearization of the thermocouple characteristic is calculated using method in compliance with DIN IEC 584 (not an approximation). • For measuring dynamic temperature changes, the ALMEMO® D7 measuring connector operates at a fast conversion rate. The measuring rate is determined exclusively by the integrated A/D converter. • On the ALMEMO® V7 measuring instrument all D7 measuring connectors operate in parallel - each at its own measuring rate. The measuring instrument's very short scan cycle is determined by the measuring rates of the d7 measuring connectors - nearly irrespective of their number. The ALMEMO® V7 measuring instrument saves the measured values; the measuring software WinControl displays them graphically. • The overall accuracy of the measuring operation is unaffected by the presence of an ALMEMO® V7 display device / data logger. In case the measuring chain - consisting of a thermocouple sensor and the connected ALMEMO® D7 measuring connector - is calibrated, the measuring chain can be connected to any ALMEMO® V7 measuring device without any additional measuring uncertainties. • At constant ambient conditions, an increased system accuracy is achieved by calibrating the thermocouple sensor using multipoint adjustment. • To designate a sensor it is possible to program comments with up to 20 characters. 11/2026 • We reserve the right to make technical changes. Technial data Sensor type: Measuring input: Measuring ranges: Conversion rate: galvanically isolated, dielectric strength 50 V 0.1 K* respectively 0.01 K for measuring range K2 / N2 2.5*, 10, 50, 100 mops calculation method (not an approximation) System accuracy at conversion rate 10 mops: type K, K2, N, N2, J, T ±0.2 K ±0.02 % of measured value type E ±0.1 K ±0.02 % of measured value type R, S, B ±0.8 K ±0.02 % of measured value Cold junction compensation sensor: NTC 10 K at 25 °C Cold junction compensation effective in the range -10 °C to +60 °C: -30 °C to +100 °C Supply voltage: 6, 9, 12 V from ALMEMO® device Current consumption: approx. 5 mA Environmental conditions see general technical specifications * Factory setting. The desired measuring range can be programmed on the ALMEMO® V7 device. ALMEMO® D7 measuring connector for thermocouples. Fast measuring rate. Integrated galvanic isolation. ZTD700FS

 Open the catalog to page 1
Digital ALMEMO® connectors-2

Input connectors for Pt100Digital ALMEMO® D7 measuring connector for Pt100 / Pt1000 temperature sensorHigh-level resolution of 0.01 K across the entire measuring range up to 850 °C Linearization of the Pt100 / Pt1000 characteristic calculated Calibration with greater accuracy by subjecting the temperature sensor to multi-point adjustment Only for latest ALMEMO® V7 measuring instruments, AlMEMO® 202-S, 204, 104, 710, 510, 809. The new ALMEMO® D7 measuring connector provides even greater precision! • The digital ALMEMO® D7 measuring connector uses its own integrated A/D converter. It provides a...

 Open the catalog to page 2
Digital ALMEMO® connectors-3

Input connectors for Pt100Digital ALMEMO® D6 measuring connector for Pt100 temperature sensorDigital temperature sensors now also for ALMEMO® V6 measuring instruments, e.g. ALMEMO® 5690, 2690, 2590 Resolution of 0.01 K across the entire measuring range up to 400 °C Linearization of the Pt100 characteristic calculatedCalibration with greater accuracy by subjecting the temperature sensor to multi-point adjustment The new ALMEMO® D6 measuring connector provides even greater precision! 11/2026 • We reserve the right to make technical changes. Technical data and functions • The digital ALMEMO® D6...

 Open the catalog to page 3
Digital ALMEMO® connectors-4

Input connectors for Pt100Digital ALMEMO® D7 Precision measuring connector for Pt100 temperature sensor, resolution 0.001 KDigital precision measuring connector with highest resolution of 0.001 K across the entire measuring range up to 850 °C Linearization of the Pt100 characteristic calculatedCalibration with greater accuracy by subjecting the temperature sensor to multi-point adjustment For ALMEMO® V7 measuring instruments, ALMEMO® 202-S, 204, 104, 710, 510, 809. The new ALMEMO® D7 measuring connector provides even greater precision! Digital precision resistance sensor Pt100 FPD723L0250A3D...

 Open the catalog to page 4
Digital ALMEMO® connectors-5

The self-heating must be included in the measurement uncertainty: If the self-heating is NOT known for the sensor design at hand, a lump sum must be charged. Example: For a sufficiently long sheath element, an amount of 17 mK is recommended. In comparison: For the Ahlborn precision probe FPA923/FPD723 the self-heating was determined and is included in the measurement uncertainty with typ. 2 mK. The hysteresis must be described in addition to the measurement uncertainty: If the hysteresis is not determined, a lump sum of up to 0.2 % of the span is recommended in international regulations. Example:...

 Open the catalog to page 5

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.