1. Catalogs
  2. Ahlborn Mess- und Regelungstechnik GmbH
  3. Differential pressure transmitter

Differential pressure transmitter

Differential pressure transmitter

Product catalog summary
Overview: The FDA 602 D is a differential pressure transmitter designed to measure differential pressure in liquid and gaseous media using two absolute pressure sensors. It is cost-effective and robust against asymmetrical overloads.
Specifications:
  • The differential pressure range must be at least 5% of the standard pressure range.
  • Each sensor side has two pressure connections, facilitating use in pressure pipes.
  • Features a high-speed, high-precision microprocessor for error compensation.
  • Standard pressure range, overload, and differential pressure range vary by version.
  • Storage/operating temperature: -40 to +100 °C; compensated range: -10 to +80 °C.
  • Error margin: ≤0.05% typical, ≤0.1% max of final value.
  • Pressure connections: G1/4" thread, female (2 per side).
  • Material: Stainless steel, 316L, DIN 1.4435.
  • Power supply: 6 to 15 VDC via ALMEMO® connector.
  • Output: 0 to 2 V.
  • Electrical connection: Binder plug with ALMEMO® connecting cable, 2 meters.
  • CE conformance: EN61000-6-1 to 4 with shielded cable.
  • Protective class: IP 65.
  • Weight: Low-pressure version 475 grams, Medium-pressure version 750 grams.
Calibration: DAkkS accredited calibration or factory calibration is available, meeting DIN EN ISO/IEC 17025 requirements.
Types and Ordering Information:
  • Low-pressure version: 3 bar standard, 10 bar overload, 0.2 to 3 bar differential (Order no. FDA602D01).
  • Low-pressure version: 10 bar standard, 20 bar overload, 0.5 to 10 bar differential (Order no. FDA602D02).
  • Low-pressure version: 25 bar standard, 30 bar overload, 1.25 to 25 bar differential (Order no. FDA602D03).
  • Medium-pressure version: 100 bar standard, 200 bar overload, 5 to 100 bar differential (Order no. FDA602D10).
Note: Technical changes may be made without notice.
See more

Catalog excerpts

Differential pressure transmitter-1

• This measures the differential pressure in liquid and gaseous media indirectly using two absolute pressure sensors. • This makes it less expensive but more robust with respect to asymmetrical overload. • The differential pressure range should be at least 5 % of the standard pressure range. • Each side of the sensor incorporates two pressure connections. The transmitters can thus be used easily and conveniently in pressure pipes. • It incorporates a high-speed, high-precision microprocessor. • All reproducible errors affecting the pressure sensors, i.e. involving non-linearity and temperature dependency, can be completely eliminated by means of mathematical error compensation. Low-pressure version Medium-pressure version 11/2026 • We reserve the right to make technical changes. Technical Data: Standard pressure range (maximum measurable pressure per pressure connection), overload, differential pressure range. See versions listed below. Storage / operating temperature -40 to +100 °C Compensated standard range -10 to +80 °C Error margin <0.05 % typical, <0.1 % max. of final value to standard pressure range (linearity + hysteresis + reproducibility + temperature error) Pressure connections G1/4“ thread, female Material in contact with medium Stainless steel, 316L, ALMEMO® connector Output 0 to 2 V Electrical connection Binder plug, including ALMEMO® connecting cable, 2 meters with shielded cable Protective class IP 65 Low-pressure version 475 grams Medium-pressure version 750 grams Differential pressure transmitter, including ALMEMO® cable, 2 meters Standard pressure range Overload Absolute pressure Low-pressure version Medium-pressure version Differential pressure range Please indicate final value Final value 0.2 to 3 bar Final value 0.5 to 10 bar Final value 1.25 to 25 bar DAkkS accredited calibration or factory calibration KD9xxx pressure for sensor or measuring chain (sensor + device), see chapter „Calibration certificates“. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

 Open the catalog to page 1

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.