ALMEMO® connector for thermocouples (see Chapter ALMEMO® Input connectors) (no thermo-electric transition / with thermal material) NiCr-Ni (K) Order no. ZA9020FS For Types U, S, R, B, AuFe-Cr Cu-CuNi (U) Order no. For Types K, J, T, S NiCr-Ni (K) NiCrSi-NiSi (N) Fe-CuNi (J) Order no. ZKA029RA Order no. ZNA029RA Order no. ZJA029RA Order no. ZTA029RA Order no. ZSA029RA Miniature flat connectors for thermocouples types K, J, T, S, E Examples for NiCr-Ni (K): Order no. ZK9029FB Order no. ZK9029FS Order no. ZB9029VP Order no. ZK9029FE Order no. ZK9029FB1 Order no. ZK9029FB6 NiCr-Ni flat socket NiCr-Ni flat connector Locking plate (10 pieces) NiCr-Ni single built-in socket 1-row panel with NiCr-Ni socket 6-row panel with NiCr-Ni socket Connectors with thermo contacts for avoiding voltage corruption at thermocouple junctions. Locking plate for complete coupling. Order numbers for the above examples are compiled from the following coding elements: Z© 9029F (2) (3). The coding elements can be taken from the table below. 01/2026 • We reserve the right to make technical changes. NiCr-Ni (K) NiCrSi-NiSi (N) Fe-CuNi (J) Cu-CuNi (T) NiCr-CuNi (E) PtRh-Pt (S) Color (IEC 584) Variant © green Male connector = S pink Female connector = B 12 units (1 row) 24 units (2 rows) Panel dimensions 38 x 38 x 2.5 mm 113 x 38 x 2.5 mm 203 x 38 x 2.5 mm 203 x 76 x 2.5 mm mounting depth: 25.4 mm DAkkS accredited calibration or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device), see chapter Calibration certificates^. DAkkS accredited calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.