Catalogs >
Ahlborn Mess- und Regelungstechnik GmbH >
Connector for thermocouples

Connector for thermocouples
1Pages

Catalog excerpts

For Types K, N, L, J, T (no thermo-electric transition / with thermal material) NiCr-Ni (K) NiCroSil-NiSil (N) Fe-CuNi (L) Fe-CuNi (J) Cu-CuNi (T) For Types U, S, R, B, AuFe-Cr Cu-CuNi (U) PtRh10-Pt (S) PtRh13-Pt (R) PtRh30-PtRh6 (B) 10/2016 • We reserve the right to make technical changes. ALMEMO® adapter plug with miniature flat socket For Types K, J, T, S NiCr-Ni (K) Fe-CuNi (J) Cu-CuNi (T) PtRh-Pt (S) Miniature flat connectors for thermocouples types K, J, T, S, E Order no. ZK9029FB Order no. ZK9029FS Order no. ZB9026VP Order no. ZK9029FE Order no. ZK9029FB1 Order no. ZK9029FB6 Examples for NiCr-Ni (K): NiCr-Ni flat socket NiCr-Ni flat connector Locking plate (10 pieces) NiCr-Ni single built-in socket 1-row panel with NiCr-Ni socket 6-row panel with NiCr-Ni socket • Connectors with thermo contacts for avoiding voltage corruption at thermocouple junctions. • For ambient temperatures -183 to +200 °C. • Locking plate for complete coupling. Order numbers for the above examples are compiled from the following coding elements : Z©9029F@®. The coding elements can be taken from the table below. Ordering: Type © NiCr-Ni (K) Fe-CuNi (J) Cu-CuNi (T) NiCr-CuNi (E) PtRh-Pt (S) green Male connector = S black Female connector = B brown lilac orange Panel dimensions 38 x 38 x 2.5 mm 113 x 38 x 2.5 mm 203 x 38 x 2.5 mm 203 x 76 x 2.5 mm mounting depth: 25.4 mm DAkkS or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device) (see chapter Calibration certificates) DAkkS calibration meets all the requirements regarding test resources laid down in DIN EN ISO/IEC 17025.

Open the catalog to page 1