Conductivity
1 /2Pages

Conductivity

Conductivity
1 /2Pages

Catalog excerpts

Conductivity-1

Shaft material: Shaft length / shaft diameter: Fitting length / thread: Maximum pressure: Cable length: Power supply: Current consumption: Conductivity Probe FYA641LFP1 / LFL1Technical Data Measuring range: 0.01 to 20 mS/cm Temperature sensor: NTC, type N (10 k at 25 °C) Temperature compensation: 0 to +70 °C, automatic Compensation coefficient: 1.9 linear Cell constant: approx. 1 cm-1 Electrode material: special coal Accuracy: ± 3 % of meas. val. ± 0.1 mS/cm Minimum insertion depth: 30 mm Concentrated waste water, aggressive waters, general aqueous and partly aqueous solutions, beer, emulsions, electroplating, waters, concentrated acidic and alkaline solutions, corrosive acids and alkaline solutions, lacquers and paints, substances containing protein, soaps, detergents, suspensions, titrations in organic substances, environmental analysis. LFP1: 130 mm / 20 mm LFL1: 130 mm / 10 mm only LFP1 145 mm / G%” LFP1: 16 bar at 25 °C LFL1: not suitable for use under pressure 8 to 12 V through meas. instr. approx. 3 mA 11/2025 • We reserve the right to make technical changes. Type (including manufacturer's test certificate) Order no. Active conductivity probe with automatic temperature compensation, Built-in probe, G 3/4“ thread, suitable for use under pressure up to 20 mS/cm FYA641LFP1 Laboratory probe, not suitable for use under pressure up to 10 mS/cm FYA641LFL1 Factory calibration KY90xx conductivity for measuring chain (sensor + device), see chapter Calibration Certificates“

 Open the catalog to page 1
Conductivity-2

Conductivity Probe FYA641LFP2 / LFL2 Applications: Low-salt waste water, general aqueous and partly aqueous solutions, fish tanks, emulsions, desalting/ion exchanger, beverages, waters, cold/boiler feed water, lacquers and paints, milk, samples with low ionic strength, substances containing protein, purest water, soaps, detergents, suspensions, drinking water, environmental analysis. Measuring range: 10 to 200 pS/cm Temperature sensor: NTC, type N (10 k at 25 °C) Temperature compensation: 0 to +70 °C, automatic Compensation coefficient: 1.9 linear Cell constant: approx. 1 cm-1 Electrode material:...

 Open the catalog to page 2

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 500

    4  Pages

  6. ALMEMO® 510

    3  Pages

  7. ALMEMO® 809

    2  Pages

  8. ALMEMO® 5690

    8  Pages

  9. ALMEMO® 1020

    2  Pages

  10. ALMEMO® 1030

    2  Pages

  11. ALMEMO® 1033

    2  Pages

  12. ALMEMO® 1036

    2  Pages

  13. ALMEMO® 8036

    3  Pages

  14. RTA5

    1  Page

  15. RTA6

    1  Page

  16. Cases

    1  Page

  17. WinControl

    13  Pages

  18. Thermo-wires

    3  Pages

  19. FIAD43

    2  Pages

  20. FIA844

    2  Pages

  21. AMiR 7843

    2  Pages

  22. AMiR 7834

    6  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. FLD733UVE

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. FLD703UVE

    2  Pages

  43. Luminance

    1  Page

  44. pH

    4  Pages

  45. CO sensor

    1  Page

  46. Certificates

    7  Pages

  47. WinControl

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.