1. Catalogs
  2. Ahlborn Mess- und Regelungstechnik GmbH
  3. CO2 measurement for indoor air quality

CO2 measurement for indoor air quality

CO2 measurement for indoor air quality

CO2 measurement for indoor air quality

Product catalog summary
Overview: The document provides technical specifications and functionalities of the Digital Carbon Dioxide Sensor FYAD 00-CO2M2 / M3, designed for assessing indoor air quality in various environments such as classrooms, healthcare facilities, and public transportation.
Specifications:
  • CO2 Sensor Models: FYAD 00-CO2M3B05 and FYAD 00-CO2M2B05.
  • Measurement Range: 0 to 5000 ppm CO2 concentration.
  • Accuracy: ±(50 ppm + 3% of measured value).
  • Nominal Conditions: 25 °C, 1013 mbar.
  • Response Time: 140 seconds.
  • Measuring Interval: Fixed 15 seconds, averaged over 60 seconds.
  • Operating Temperature Range: FYAD 00-CO2M3B05: -40 to 60 °C; FYAD 00-CO2M2B05: -10 to 60 °C.
  • Humidity Range: 0 to 95% relative humidity (non-condensing).
  • Pressure Range: 700 to 1100 mbar.
Functionalities:
  • Continuous recording of CO2 levels and air temperature for air quality analysis.
  • Simultaneous measurement of air temperature and pressure.
  • Auto-calibration without fresh air supply to compensate for aging effects.
  • Low power consumption suitable for long-term measurements.
Components:
  • Sensor Tube: Stainless steel for FYAD 00-CO2M3B05.
  • Filter Cap: PTFE, protects against dust and dirt.
  • Connection: Via ALMEMO® D6 connector, with options for permanently connected cable or direct mounting.
Calibration and Standards:
  • ÖKD calibration compliant with DIN EN ISO/IEC 17025.
  • Calibration available through DAkkS accredited laboratory.
Power and Connectivity:
  • Supply Voltage: 6 to 13 V DC.
  • Current Consumption: Approximately 4 mA average, 70 mA maximum.
Ordering Information: Two versions available, FYAD00CO2M3B05 with handle and cable, and FYAD00CO2M2B05 directly mounted on connector.
See more

Catalog excerpts

CO2 measurement for indoor air quality-1

Digital carbon dioxide sensor FYAD 00-CO2M2 / M3 for assessing the indoor air quality. With ALMEMO® D6 connector. Technical data and functions • Calibrated reference system for CO2 concentration for checking CO2 sensors permanently installed in the building management system (BMS) / room ventilation system (AHU). • Digital sensor with integrated signal processor. All calibration and sensor data are stored in the sensor. • Unique auto-calibration procedure (without fresh air supply): aging effects are automatically compensated. • With filter cap to protect against dust and dirt. • Automatic compensation with built-in digital temperature and barometric pressure sensor. • Low power consumption. Long-term measurements with ALMEMO® data logger in sleep mode; only for current instrument types with sleep delay. • 3 primary measurement channels (real measured variables): carbon dioxide concentration, air temperature, air pressure. 11/2026 • We reserve the right to make technical changes. • Assessment of air quality for checking demand-oriented ventilation in recreation and work rooms, including classrooms, lecture halls, day care centers, meeting rooms, event rooms, production halls, health care facilities, public transportation. • In combination with an ALMEMO® data logger, the measured values are continuously recorded with date, time. Based on the stored data, a differentiated analysis of the air quality during the room usage times is possible. • Simultaneous measurement of air temperature as a criterion for assessing the quality of stay (comfort) in the rooms. concentration • Quantitative measurement of CO2 in ppm. Differentiated decision for concentrations near the quality levels 1000 ppm and 2000 ppm. On request: calibration of the sensor (traceable) by a DAkkS accredited cal

 Open the catalog to page 1
CO2 measurement for indoor air quality-2

Room Air ConditionsTechnical Data Sensor: 2-beam infrared sensing element. Non-dispersive infrared technology _(NDIR)._ Automatic compensation of pressure and temperature dependence of CO2 measurement with the built-in sensors. Accuracy: ±(50 ppm +3 % of measured value) Nominal conditions: 25 °C, 1013 mbar Switch-on time (initialization): 15 s Response time t63: 140 s Measuring interval: fixed 15 s as exponential moving average over 60 s (= 4 instantaneous values 15 s). FYAD 00-CO2M3B05: permanently connected cable 2 m with ALMEMO® plug FYAD 00-CO2M2B05: sensor mounted directly on ALMEMO® connector...

 Open the catalog to page 2

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.