*mydirectindustry

ALMEMO® View-english

Product catalog summary

Overview: ALMEMO® View is a software package designed for evaluating and displaying data from an ALMEMO® device with up to four measurement channels. It operates under MS-Windows and facilitates the connection and data management of measuring instruments.

Specifications: The software supports up to four measuring points and automatically detects these points once connected to a computer. Users can select the sampling rate for reading measured values.

Data Logger: The software allows reading, displaying, and saving data from the ALMEMO® data logger. Data can be shown as line charts or tables, and parameters can be set and programmed through a dialog interface.

Display and Saving: Measured data can be displayed numerically, in tables, or as line charts. Users can choose to display one or multiple measuring points simultaneously. Data can be archived in chart or table form.

Printing and Documentation: ALMEMO® View supports printing diagrams, tables, and lists of measuring points with correction values. It includes a print preview feature and supports all MS-Windows compatible printers. Data can be copied to other applications via the clipboard for further documentation.

System Requirements: The software is compatible with computers running Windows XP or newer (x86/x64). It is important to note that ALMEMO® View does not support ALMEMO® V7 devices.

Ordering Information: The basic software version for up to four measuring channels is available under order number SW5500AV.

Note: The document reserves the right to make technical changes.

Catalog excerpts

Software ALMEMO® View ALMEMO® View is a software package that can be used to evaluate and display measured data on one ALMEMO® device with up to four measurement channels. ALMEMO® View runs under MS-Windows and can be used to drive an ALMEMO® device with up to four measuring points. As soon as the connection between the computer and the measuring instrument has been established the program detects and lists these measuring points automatically. The measured values are then read at a sampling rate selected by the user. 11/2025 • We reserve the right to make technical changes. Data logger The measured value memory on an ALMEMO® data logger (maximum four measuring points) can be read out, displayed as a line chart or table, and saved to a file. The parameters needed to operate the measuring instrument can be set via a dialog and programmed with ALMEMO® View Display of measured values The recorded data can be displayed in numeric form, in a table, and as a line chart. It is possible to display just one measuring point or several measuring points at the same time in different modes. Saving measured values Measured values can be archived in line chart or table form. Printing out ALMEMO® View can also be used directly to print out diagrams, tables, or a list of all measuring points with their associated correction values, e.g. for the purposes of technical documentation. The results can be viewed in advance before printing out in the print preview. The program supports all printers that can normally be installed under MS-Windows. Documentation To compile protocols using some other software the line charts, tables, and lists in ALMEMO® View can be copied via the MS-Windows clip-board to other application programs. Please note: The ALMEMO® View does NOT work with ALMEMO® V7 devices. Software versions Basic ALMEMO® View software for maximum four measuring channels (recommended for 1 measuring instrument with a maximum of 4 measuring channels, connection via 1 COM interface) System requirements: ALMEMO® View can be run on a computer (x86/x64) with Windows XP

Open the catalog to page 1

ALMEMO® View-english

ALMEMO® View-english

Catalog excerpts

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures