ALMEMO® Connectors for NTC

ALMEMO® Connectors for NTC

ALMEMO® Connectors for NTC

Product catalog summary
Overview: The document provides technical specifications and functionalities of the digital ALMEMO® D6 measuring connector designed for NTC temperature sensors. It highlights the precision and accuracy of the device, achieved through advanced linearization and calibration techniques.
Technical Specifications:
  • Sensor Type: NTC type N
  • Measuring Input: Electrically interconnected with the power supply (ALMEMO® device ground)
  • Measuring Ranges: Varies by type
  • Resolution: Varies by type
  • Refresh Rate: 0.3 seconds for up to two channels
  • Linearization: Calculated using Galway Steinhart coefficients
  • Accuracy: ±0.05 K at -50 to +100 °C, ±0.02 K at -20 to +65 °C
  • Nominal Temperature: 23 °C ±2 K
  • Temperature Drift: 0.004 % / K (40 ppm)
  • Supply Voltage: From 6 V, provided by ALMEMO® device
  • Current Consumption: Approximately 4 mA
Key Features:
  • High precision and resolution of 0.001 K across the measuring range of -20 to +65 °C.
  • Linearization of the NTC characteristic is calculated, not approximated, using Galway Steinhart coefficients.
  • Increased accuracy due to multi-point adjustment during calibration.
  • Compatible with ALMEMO® V6 and V7 measuring instruments, including ALMEMO® 2490 and ALMEMO® 202-S.
  • Allows connection of customer-specific NTC sensors after configuration of Steinhart-Hart coefficients via the sensor menu.
Product Variants:
  • NTC, 1 input: Measuring range -50 to +125 °C, Resolution 0.01 K, Order no. ZAD040FS
  • NTC, 2 inputs: Measuring range -50 to +125 °C, Resolution 0.01 K, Order no. ZAD040FS2
  • NTC, 1 input: Measuring range -20 to +65 °C, Resolution 0.001 K, Order no. ZAD040FS3
Additional Information: The document notes that technical changes may be made without notice.
See more

Catalog excerpts

ALMEMO® Connectors for NTC-1

Digital ALMEMO® D6 measuring connector for temperature sensors NTC High levels of precision and resolution 0.001 K across measuring range -20 to +65 °C. Linearization of the NTC characteristic - calculated using Galway Steinhart coefficients. Increased measured value accuracy - thanks to multi-point adjustment of the NTC sensor during calibration. For all ALMEMO® V6 and V7 measuring instruments, including ALMEMO® 2490 and ALMEMO® 202-S. 11/2026 • We reserve the right to make technical changes. Technical data and functions • The digital ALMEMO® D6 measuring connector uses its own integrated A/D converter. Linearization of the NTC characteristic is calculated using the Galway Steinhart coefficients (not an approximation). Across measuring range -20 to +65 °C this produces the very high resolution of 0.001 K. • The digital temperature sensor reaches this high level of precision irrespective of any extension cables used and of any processing in the ALMEMO® display device / data logger. Overall accuracy is determined exclusively by the NTC sensor and the ALMEMO® D6 measuring connector. This increased measured value accuracy is achieved by subjecting the NTC sensor to multi-point adjustment during calibration. With the ALMEMO® D6 measuring plug, customer-specific NTC sensors can be connected to the ALMEMO® system after the corresponding Steinhart-Hart coefficients have been configured via the sensor menu. When using own sensors no additional adjustment of the connector is necessary. Technical data Sensor type Measuring input Measuring ranges Resolution Electrically interconnected with the power supply (ALMEMO® device ground) see variants see variants Refresh rate 0.3 seconds for up to two channels Linearization Calculated Supply voltage from 6 V up, from ALMEMO® device (sensor supply voltage) Current consumption approx. 4 mA Environmental conditions see general technical specifications Type / input NTC, 1 input NTC, 2 inputs NTC, 1 input

 Open the catalog to page 1
ALMEMO® Connectors for NTC-2

Input connectors for NTC ALMEMO® Connector for Ntc Sensors Meas. Range 11/2026 • We reserve the right to make technical changes.

 Open the catalog to page 2

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.