1. Catalogs
  2. Ahlborn Mess- und Regelungstechnik GmbH
  3. ALMEMO® Connector for measuring bridges

ALMEMO® Connector for measuring bridges

ALMEMO® Connector for measuring bridges

ALMEMO® Connector for measuring bridges

Product catalog summary

Overview: The document provides technical specifications and functionalities of the ALMEMO® D7 digital measuring connector, designed for high precision or fast conversion rate measurements in various applications such as force transducers, torque transducers, and strain gauges.

Key Features:

  • The ALMEMO® D7 connector integrates its own A/D converter, ensuring measurement accuracy is independent of the ALMEMO® V7 display device or data logger.
  • It supports high resolution up to 200,000 digits or a fast conversion rate with a resolution up to 50,000 digits.
  • Compatible with the latest ALMEMO® V7 measuring instruments, including models 202-S, 204, 104, 710, 510, and 809.

Technical Specifications:

  • Sensor Type: Full bridge, 4 conductors with a minimum bridge resistance of 350 Ohm.
  • Bridge Power Supply: 5 V with an accuracy of 0.01% and a temperature drift of 10 ppm/K.
  • System Accuracy: 0.02% +2 digits at 10 measurements per second.
  • Nominal Temperature: +22 °C ±2 K with a temperature drift of 0.003%/K (30 ppm).
  • Supply Voltage: From 6 V up from ALMEMO® device with a current consumption of approximately 32 mA (without force transducer).

Measurement Capabilities:

  • Measurements are conducted using a full bridge with a 4-conductor circuit, powered by the ALMEMO® D7 plug.
  • The sensor can be scaled to its actual physical quantity, with zero-point adjustment and scaling of end value via the ALMEMO® V7 device or ALMEMO® Connect software.

Types and Order Information:

  • Various models are available with different input and display ranges, such as DMS1, DMS2, DMS3, and DMS4, each with specific conversion rates and resolutions.
  • Factory settings allow for programming the desired measuring range on the ALMEMO® V7 device itself.

Additional Features:

  • Energy-saving feature ensures the bridge voltage remains off when the measuring point is not selected.
  • Zero-symmetrical voltage supply of ±2.5 V stabilized from the ALMEMO® device.
See more

Catalog excerpts

ALMEMO® Connector for measuring bridges-1

Digital ALMEMO® D7 measuring connector for bridge differential mV For force transducers (tension / compression), torque transducers, or strain gauges High resolution up to 200 000 digits or fast conversion rate, resolution up to 50 000 digits. Only for latest ALMEMO® V7 measuring instruments, ALMEMO® 202-S, 204, 104, 710, 510, 809. The new ALMEMO® D7 measurement plug enables high precision or fast conversion rate applicable for a vast variety of measuring tasks. The user can select the preferred configuration quickly and easily on the ALMEMO® V7 measuring instrument itself. 11/2026 • We reserve the right to make technical changes. Technical data and functions • The digital ALMEMO® D7 measuring connector uses its own integrated A/D converter. The overall accuracy of the measuring operation is unaffected by the presence of an ALMEMO® V7 display device / data logger. The whole measuring chain, comprising e.g. a force transducer and the connected ALMEMO® D7 measuring connector, can be calibrated end-to-end. • The measuring rate is determined entirely and exclusively by the integrated A/D converter. On the ALMEMO® V7 measuring instrument all D7 measuring connectors operate in parallel at their own measuring rate. The measuring instruments very short scan cycle is determined by the measuring rates of the D7 measuring connectors - irrespective of their number. • For high resolutions and stable values, e.g. for precision force transducers, the ALMEMO® D7 measuring plug works with a Technical data Sensor type Full bridge, 4 conductors Bridge resistance at least 350 Ohm Measuring input electrically interconnected with the power supply (ALMEMO® device ground) Input range see variants Display range, Conversion rate see variants Bridge power supply 5 V reduced conversion rate. For fast processes, measurements can be taken at a higher conversion rate. The ALMEMO® V7 measuring device stores the measured values and the WinControl measuring software displays them graphically. • Measurements are taken using a full bridge with a 4-conductor circuit. The bridge is powered from the ALMEMO® D7 plug. • The sensor is scaled to its actual physical quantity (e.g. end value 1 kN with characteristic 2 mV / V); this is performed via the ALMEMO® V7 device (device itself or ALMEMO® Connect software), - zero-point adjustment, - scaling of end value by entering characteristic mV / V or adjustment by loading the bridge with end value The assigned units can be up to 6 characters in length. Sensor identification can be programmed with designations up to 20 characters in length. System accuracy 0.02 % +2 digits at 10 measurements / second Nominal temperature +22 °C ±2 K Supply voltage from 6 V up from ALMEMO® device (sensor supply voltage) Current consumption approx. 32 mA (without force transducer) Environmental conditions see general technical specifications Conversion rate 10 mops 1000 mops 10 mops 1000 mops * Factory setting: The desired measuring range can be programmed on the ALMEMO® V7 device itself. Option: Configuration of ALMEMO® D7 measuring connector; conversion rate 1000 mops, DMS2 (±29.3 mV)

 Open the catalog to page 1
ALMEMO® Connector for measuring bridges-2

Technical Data from revision R5, see connector sticker Sensor type: Full bridge, 4 conductors Bridge resistance: at least 120 Ohm Sensor supply Bridge supply: 5 V ±0.2 % at nominal temperature with device sensor supply voltage Energy saving: So long as the measuring point is not selected, the bridge voltage remains switched OFF. Types: Model Meas. Range Resolution

 Open the catalog to page 2

All Ahlborn Mess- und Regelungstechnik GmbH catalogs and technical brochures

  1. ALMEMO® 2470

    3  Pages

  2. ALMEMO® 2890

    2  Pages

  3. ALMEMO® 104

    3  Pages

  4. ALMEMO® 710

    3  Pages

  5. ALMEMO® 510

    3  Pages

  6. ALMEMO® 809

    2  Pages

  7. ALMEMO® 5690

    8  Pages

  8. ALMEMO® 1020

    2  Pages

  9. ALMEMO® 1030

    2  Pages

  10. ALMEMO® 1033

    2  Pages

  11. ALMEMO® 1036

    2  Pages

  12. ALMEMO® 8036

    3  Pages

  13. RTA5

    1  Page

  14. RTA6

    1  Page

  15. Cases

    1  Page

  16. WinControl

    13  Pages

  17. OPC export

    4  Pages

  18. ODBC

    4  Pages

  19. Web server

    4  Pages

  20. PIMEX

    4  Pages

  21. CAN Trace

    4  Pages

  22. Thermo-wires

    3  Pages

  23. FHAD 36 Rx

    4  Pages

  24. FHA 646 R

    1  Page

  25. FHAD46-7

    1  Page

  26. Psychrometer

    1  Page

  27. MH8D46

    2  Pages

  28. Pitot Tubes

    2  Pages

  29. Force

    3  Pages

  30. Displacement

    2  Pages

  31. Vibration

    2  Pages

  32. Speed

    1  Page

  33. Flow

    2  Pages

  34. Wind sensor

    2  Pages

  35. Comfort Index

    2  Pages

  36. Sound Level

    1  Page

  37. Moisture

    5  Pages

  38. Tensiometer

    1  Page

  39. FLAD03VL1

    1  Page

  40. FLA623

    3  Pages

  41. VLambda

    1  Page

  42. Luminance

    1  Page

  43. pH

    4  Pages

  44. Conductivity

    2  Pages

  45. CO sensor

    1  Page

  46. Certificates

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.