Data logger ALMEMO® 510 ALMEMO® data logger of the latest generation V7. Modular data logging with active measuring circuit boards, up to 100 measuring inputs for all sensors. Operation as PC interface for online measurement with Win-Control software. 11/2025 • We reserve the right to make technical changes. Technical data and functions ALMEMO® 510 • ALMEMO® device of the latest generation V7. • Operation as a PC interface for online measurement with Win-Control software from WC2 standard (accessory). • Modular measuring system with active measuring circuit boards. Each measuring circuit board has its own address (adjustable). 3 different housing designs are available. • 2 measuring circuit boards as standard, 20 ALMEMO® input sockets, galvanically isolated for the connection of up to 20 ALMEMO® sensors of all generations (analog/DIGI/D6/D7), up to 200 sensor channels (sensor-dependent). • Expansion with additional measuring circuit boards, depending on the housing width, up to 100 measuring inputs with up to 1000 measuring channels. • Sensors with analog signals are measured with the built-in fast and high-resolution AD converter. The additional electrical isolation between measurement inputs and supply (device ground) increases the measurement quality. Digital D6 sensors and the new digital D7 sensors transmit their measured values digitally to the measuring device. The measuring device supports all ALMEMO® connector and sensor functions. The complete configuration of all sensor parameters for ALMEMO® standard, D6 and D7 sensors is carried out via the ALMEMO® Connect software. • The KL option allows multi-point adjustment or linearization to be programmed in the ALMEMO® connector for ALMEMO® Technical data Measuring inputs: Standard configuration: 20 ALMEMO® input sockets for all ALMEMO® sensors Channels (Standard): up to 200 measuring channels Extension: up to 100 inputs depending on the housing Precision class: AA technical data see chapter beginning Measuring rate for analog sensors, DIGI, D6 sensors: Galv. isolation with semiconductor relay (50 V) for analog sensors additional galv. isolation between measu ring inputs and supply (device ground) Sensor voltage supply: 12 V, max. 400 mA per measuring circuit board, max. 1.2 A per data logger When battery operated: also 6/9 V Interface: 1 ALMEMO® output socket A1 for interface cable sensors (e.g. for temperature sensors or pressure sensors). This is possible with all ALMEMO® connector versions: standard connectors (analog or with DIGI range), ALMEMO® D6 and D7 connectors. • Interface card with digital interface via 1 ALMEMO® output socket A1 (common for all measuring circuit boards). All ALMEMO® networks are possible via the digital ALMEMO® output cables: RS232, USB, Ethernet, WLAN, ALMEMO® radio module. • The complete configuration of all device parameters is carried out with the ALMEMO® Connect software. • Display of the operating states on the interface card and the measuring circuit boards via LEDs. • For long-term measurements, a rechargeable battery pack is available (accessories) to bridge (brief) interruptions in the power supply. • If the connection to the PC is interrupted, the measured values in each measuring circuit board can be buffered in the built-in data memory (FAIL SAVE mode, configurable). • The RTA6 relay/trigger/analog interface is available as a plugin card (accessory) for the output of alarm and control signals. The outputs can be controlled either directly from the measuring device or from the WinControl software (with alarm function, optional). Standard equipment: (400 000 up to 1.5 million meas. values) Time and date: Real-time clock (4.7 ppm), lithium battery Power supply: via ALMEMO® DC socket to 12 V DC, at least 2 A galv. isolated Battery (accessories): 2 lithium batteries, total 13.8 Ah, Quick-charging circuit (3 h) integrated Power consumption without input and output modules ca. 180 mA without sensor / sensor system (Standard configuration) Ambient conditions see general technical specifications

ALMEMO® Measuring Instruments Order no. WinControl software for recording measured values, for any number of measuring circuit boards (devices) and channels, for versions and description see Software chapter Active measuring circuit board MA10 (extension), 2 slots, 10 ALMEMO® input sockets Relay/trigger/analog card, 2 slots. Up to 4 cards are supported per system, see chapter Output modules Battery pack (Li-Ion) 13.8 Ah. Space requirement 2 slots, incl. power supply unit ZB 1212NA11 Transport case, aluminum profile frame/ABS, for ALMEMO® 510 in TGx desktop housing Rack case with carrying handle,...

ALMEMO® Measuring Instruments Interface card, active measuring circuit boards and extensions for ALMEMO® 510 data logger Data logger ALMEMO® 510 In operation as a PC interface with the WinControl software For recording, displaying and processing all measured data 11/2025 • We reserve the right to make technical changes.