ALMEMO® Measuring Instruments ALMEMO® data logger Precision measuring instrument, up to 90 measuring inputs. Comprehensive functions covering all application areas. PC control via app. Solving complex measuring tasks using the ALMEMO® 500 The increasing digitalization and networking changes the entire chain of production. This also applies to measuring instruments that must be able to integrate themselves into existing networks – Keyword Industry 4.0. Our new web-based technology positions us future-proof for the era of increasing networking. Our customer receives a scalable system for recording numerous measuring points with maximum precision. The device can be controlled via PC and state-of-the-art interfaces such as USB. A web service makes the measurement data accessible anywhere and anytime. The new networking features are perfect for e.g. monitoring climate or production processes. It is possible to access all networking features and measured value enquiries with the Windows App ALMEMO® 500 or as usual via PC using the WinControl software. Modern control via app and web service The user operates the ALMEMO® 500 on the PC with the Windows App ALMEMO® 500. An integrated web service enables access to the data logger. However, the app not only visualizes the measurement data. The software also allows the user to configure the entire data logger as well as all attached sensors conveniently on the PC. It is possible to export data to Excel as well. This is useful in case the measurement data shall be further processed in Excel or other programs. Thanks to the web service it is possible for several users to simultaneously log into the device e.g. from different locations in case of decentralized measured value monitoring. An intelligent permission management ensures that measurements are not accidentally changed. A Wi-Fi hotspot integrated in the data logger is responsible for the connection between the PC and the data logger. In the standard configuration this is set up as an access point, which provides the user with a secure Wi-Fi network. Alternatively, the data logger can also connect to an existing network as client. This is enabled by a special client mode in the measuring instrument that allows the user to access the data logger via a company network or an external VPN connection. A configuration website integrated in the data logger allows the user to configure the Wi-Fi hotspot, e.g network settings or encryption, in just a few steps. This works similar to the configuration of a router. The ALMEMO® 500 enables the user to view historical measurement sequences saved on the measurement data storage using the app. The measurement sequences can be loaded offline as well as during measurement operations. Monitor up to 90 measuring inputs in fail-safe operation Ahlborn features the ALMEMO® 500 standard version with 20 galvanically isolated measuring input sockets. Depending on the housing width, the device can be augmented to up to 90 measuring input sockets by inserting further plug-in cards. For thermocouple measurements, the data logger features internal cold junction compensation. Optionally available battery compartments enable fail-safe longterm measurements. Operated with batteries, the ALMEMO® 500 can be used as a mobile device as well. Store millions of measured values internally A SD memory card is integrated in the data memory of the ALMEMO® 500. Depending on the measurement resolution, this card is sufficient for many millions of measured values. For long-term measurements, it is possible to configure the data memory as a ring memory. In case the memory is not sufficient, the user can plug in additional memory in form of an USB flash drive or an USB hard disk via the USB port. The ALMEMO® 500 will then save all measurement data to the external medium. Networking thanks to state-of-the-art interfaces It is possible to link several ALMEMO® 500 devices via the USB interfaces or via the integrated access point, using either Wi-Fi or LAN network. The user operates all devices via the Windows App ALMEMO® 500. Additionally, the measured values can also be queried and displayed using the measured value acquisition software WinControl. Depending on the use case: desktop housing or rack housing Ahlborn features the ALMEMO® 500 with a desktop housing of type TG6 and TG8. The side frames are manufactured using two-component injection molding (2-shot-molding). The device can be carried on stable aluminum handles. Rubberized components prevent the ALMEMO® 500 from slipping. Thanks to the particular form of the side frames, the housings are stackable. Apart from the desktop housing, Ahlborn features an additional device version in the classic 19-inch rack housing suitable for cabinet solutions. 02/2025 • We reserve the right to make technical changes.

ALMEMO® Measuring Instruments Ports for ALMEMO® sensors and for networking (OLED status display) Easy programming and visualization of measurement data with the Windows App ALMEMO® 500 on the PC Technical data and functions ALMEMO® 500 • ALMEMO® data logger from the latest V7 generation • Access via integrated web service and access point, two WiFi access modes: access point or client (for integration in an existing network) • The device is easy and intuitive to use thanks to the Windows App ALMEMO® 500 on the PC • Visualizing measured values and configuring the data logger via the preinstalled...

ALMEMO®V7 ALMEMO® 500 Numerous measured value displays The Windows App ALMEMO® 500 on the PC offers different measured value displays. • Measured values can be displayed as numerical single measurement values, value lists or freely configurable measurement value displays. • The measurement functions include inter alia measured value, minimum value, maximum value and average value. • To graphically display the measured values, the line graph is able to show 20 measurement sequences. • An integrated sidebar enables the user to quickly switch between three different display modes: automatic, manual...