BCP-619 Broadband Current Probe 100 Hz - 100 MHz This current probe measures high power pulse currents such as those associated with EMP wave shapes. It clamps around large conductors or bundles of wire and has an aperture of 2.7”. Frequency Range: 100 Hz - 100 MHz Transfer Impedance (dBQ)-90 to -43 Max Primary Current CW 60 Amps Max Primary Current 300 Amps (at 400 Hz) Max Primary Current Peak 5,000 Amps Connector: N-Type, Female Physical Dimensions Aperture: 2.7" (70 mm) Diameter: 5.0" (125 mm) Weight: 2.5 lb.'s (1.13 kg) Features • High current conducted emissions measurements without saturation. • Ideally suited to measuring currents on large cables. • Individually Calibrated (Transfer Impedance calibration included) • Split Type Clamp-on Design • Three Year Warranty Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-619 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multiconductor cables, ground and bonding straps, shielded conduits and on coaxial cables. • CPF-530 Current Probe Fixture

[email protected] www.AHSystems.com