video corpo

High-performance turbines 3.6
8Pages

{{requestButtons}}

Catalog excerpts

High-performance turbines 3.6 - 1

AGTOS High Turbines @ AGTOS' • Blast machines • Second-hand machines • Conveyor systems • Service and spare parts Advantages of AGTOS High Performance Turbines: Rapid assembly, no special tools required Less wear parts High performance due to high abrasive throughput

Open the catalog to page 1
High-performance turbines 3.6 - 2

Distinct Advantages of AGTOS High Performance Turbines AGTOS high performance turbines have blasting wheels provided with six throwing blades locked into one side of the wheel disc. The single-disc wheel offers the following advantages: Advantages of single-disc wheels over double-disc wheels: ery rapid assembly without any V special tools ess wear parts due to 6 instead of L 8 or more throwing blades, no spacer bolts, and no second disc element igh performance H – due to high abrasive throughput – due to reduced vortexing of the blasting compound – due to reduced vortexing of the blasting...

Open the catalog to page 2
High-performance turbines 3.6 - 3

AGTOS high performance turbine housings are made of highly wear-resistant manganese steel. The housing design is extremely maintenance friendly: • simple design • few screws • throwing blades and other turbine components can be replaced from the inside and from the top Exchangeable manganese or tool steel plates provide additional protection of the housing against wear and tear. This means: Reduced assembly time and costs for maintenance and repair. The impeller pre-accelerates the blasting material and targets it to the throwing blades. The blasting angle can be set by means of an...

Open the catalog to page 3
High-performance turbines 3.6 - 4

Professionalism Down to the Last Detail High efficiency Blasting abrasives AGTOS high performance turbines are driven by reliable flange motors. This applies to turbines with an engine power of 5.5, 7.5, 11, 15, 18.5, 22, and 37 kW. For higher powered systems, motors with bearing blocks can be used. As applications demand, AGTOS turbines are operated with steel shot up to the size of 3 mm, making it possible to run large-size shotblasting plants even with major distances to the workpieces. Custom-made turbines For special applications (e. g. shot peening) AGTOS high performance turbines are...

Open the catalog to page 4
High-performance turbines 3.6 - 5

Improved Performance by New Turbine Technology AGTOS high performance turbines are not exclusively installed on new equipment. All machines retrofitted with the AGTOS system have since achieved a higher blasting efficiency. AGTOS high performance turbines are often used to improve the performance of older blasting machines; here: a monorail shot blasting machine. AGTOS high performance turbine in a roller conveyor shot blasting machine (top) and tumble shot blasting machine (bottom). Assembly of an AGTOS high performance turbine.

Open the catalog to page 5
High-performance turbines 3.6 - 6

AGTOS Inside Apart from replacing your complete turbine, we also offer our AGTOS Inside conversion kit. The inner workings of an AGTOS turbine are installed into an existing, intact turbine housing. There is a choice between two alternatives: Please contact us for further information. Advantages of the AGTOS wear lining over other turbine linings: • full material thickness in the surface area of blasting Alternative 2: In addition to Alternative 1, the cover and side linings are also replaced, thereby reducing the investment cost while the blasting results are enhanced. To benefit from...

Open the catalog to page 6
High-performance turbines 3.6 - 7

Adjacent Units Dosing shell valve (electronically controllable via switch cabinet) Shell valves or magnetic valves (Magna valves) feed the blasting media to the turbines. AGTOS shell valves are frequently used in all established shot blasting machines. They are very reliable and can be retrofitted to foreign turbines. The flow of abrasive media is controlled manually with set screws. Dosing shell valves constitute a further development in flow control. They can be adjusted electronically via switch cabinet. Shell valve (manually adjustable) Magnetic valves are used when a very precise...

Open the catalog to page 7
High-performance turbines 3.6 - 8

AGTOS high performance turbines installed in a continuous monorail shot blasting machine. AGTOS high performance turbines installed in a roller conveyor shot blasting machine. For an engine power of more than 37 kW, turbines with a separate motor (V-belt drive) are used. @ AGTOS’ AGTOS Gesellschaft fur technische Oberflachensysteme mbH GutenbergstraBe 14 D-48282 Emsdetten Tel.: +49(0)2572 96026-0 Fax: +49(0)2572 96026-111 info@agtos.de www.agtos.com

Open the catalog to page 8

All AGTOS GmbH catalogs and technical brochures

  1. BG Brochure en

    16 Pages

  2. DT Brochure en

    16 Pages

  3. HB Brochure en

    16 Pages

  4. DS Brochure en

    16 Pages

  5. MR Brochure en

    16 Pages