Smart Quality Scanners for Textile Industry 4.X

General Description Quality Bar is a genuine high-resolution online fabric inspection system with multi-modes scanning processes and simultaneous front & back lighting with RGB+IR light sources. Quality Bar may be installed on a weaving loom or on a fabric inspection machine or even on a fabric spreading machines to check any kind of woven or knitted fabrics. Quality Bar detects and reports all quality issues such as fabric irregularity, lump. knot, hole, irregular edge, missing weft /wrap irregular weft or warp, weft slope, fabric pattern error etc. on the fabric. If needed it can even give...

Backlight -{- Frontlight ~ Quality Bar Spot Defects • Slub • Corky • Flufl • Lump • Knot • Hole etc. General • Online check • Machine stopping (eature • Number of warp detection • Delect Map Fabric Defects • Fabric width • Slain • Fabric irregularity • Fabric pattern delects Vertical Defects • Missing warp • Warp density • Irregular warp • Broken needles Horizontal Defects • Irregular welt • Irregular edge • Welt slope • Slub on the welt • Missing / Incompleted welt Technology High Speed Scanning Sensor Scanning speed Up to 100 meter/min Faulty detection Fabric defects, weft defects, warp defects...

General Description Digital Dropwire that is a revolution of the mechanical dropwires is high resolution online optical dropwire system to sense the yarn breaks and defects on the wrapping, rebeaming, before-weaving looms* for especially denim yarns or any kind of yarns. Digital Dropwire detects the broken yarn and defects then can give the stop command to the loom immediately or report the all issues. ONLINE DIGITAL DROPWIRE I Technical Information I Technology High Speed Scanner Sensor Faulty detection Yarn breaks, yarn defects Communication Ethernet or Wi-Fi Output 2 pcs. NPN, open collector,...

General Description Finishing Bar is an online fabric inspection system for fabric finishing processes with mono & colored camera and front & back lighting. Finishing Bar may be used on a dyeing, sizing, fixing, dipping etc. processes for any kind of fabrics. Finishing Bar detects and reports all quality issues such as fabric irregularity, lump, knot, hole, irregular edge, irregular weft or warp, fabric pattern error etc. on the fabric. If needed it can even give the stop command to the loom while detection. Also, all of issues can be sent to the cloud or webservice etc. for Industry 4.X. Technology...

Spot Defects • Accumulation • Flulf • Lump • Knot • Hole • Water or grease stain etc. General • Online check • Machine stopping feature • Number of warp detection • Defect map Fabric Defects • Fabric width • Stain • Fabric irregularity • Fabric pattern defects Vertical Defects • Missing warp • Warp density • Irregular warp • Broken needles Horizontal Defects • Irregular welt • Irregular edge • Welt slope • Slub on the well • Missing / Incompleled weft Technology High Speed Line Scan Camera Sense res. at speed Up to 450 meter/min Faulty detection Fabric defects, weft defects, warp defects Communication...

General Description HS-Quality Eye 1D is a solid state one-dimensional online yarn quality sensor with optical scanning technology specially to sense slub and dtex/denier value for fibers & yarns up to 6000 m/min. HS-Quality Eye 2D is a solid state two-dimensional online yarn quality sensor with optical scanning technology specially to sense slub and high-accuracy dtex/denier value for fibers & yarns processes up to 6000 m/min. HS-Quality Eye 1D/2D detects and reports all quality issues such as yarn break, high- accuracy dtex/denier value and variation, slub, splice recognition and measures pollution,...

Sensor Type Pixel Count Resolution Axis Dtex Value Signal from sensor Pollution Level Yarn Speed X Sensor Photo diode 1 No axis Only Relative Change No 2500 m/min HS-Quality Eye ID Linear Image Array 128 400 dpi 1 axis Absoulule Value Absoulule Thickness Yes 6000 m/min HS-Quality Eye 2D Linear Image Array 2 x 128 2 x 400 dpi 2 axis High-Accuracy Absoulule Value Absoulute Thickness Yes 6000 m/min I Dtex Calculation I I Analog Signal I HS-Quality Eye calculates the dtex value as below using areas on X and Y axis of yarn. HS-Quality Eye shows analog signal for each axis. Area = Jf(x)dx x Jflyldy...

General Description Quality Eye is a solid-state online yarn quality sensor with optical scanning technology (or twisting or winding processes with wide range of any kind of yarns up to 100 m/min*. Quality Eye detects and reports all quality issues such as yarn break, dtex variation**, slub, corky screw**, splice recognition and measures the length, thickness, thinness, hairiness and tension of the yarn. If needed it can even give the stop command to the machine while detection. Also, all of issues can be implemented for the cloud or webservice etc. tor Industry 4.X. Technology Quality Eye uses...

Quality Eye learns the yarn thickness during the first a few seconds after machine starting. Then starts to measure the percentages of relative changes on thickness, hairiness etc. Measures • Length • Tension • Thickness • Hairiness Detects • Yarn Break • Dtex Variation • Stub • Corky Skrew • Splice Recognition Resolution • 1000 lines per second. • 42 um resolution at X axis • 1 mm sensing at 60 m/min. Action • Online records the all yarn quality issues with date and time. • Stops the machine when detects the defects, yarn break or maximum meler count. Technology High-Resolution Scanning Sensor...

BOSB. Bakircilar San. Sit. Orkide Cd. 5/7 Beyiikduzu/ Istanbul TURKEY Phone: .90 212 501 22 26 Fax 1.90 212 612 70 98 [email protected]