AIR TEMPERATURE GAUGE
2Pages

{{requestButtons}}

Catalog excerpts

AIR TEMPERATURE GAUGE - 1

The temperature transducer measures external air temperatures from –30°C up to +70° C. The sensing element is made from a thermo resistant compound, PT100, its resistance value changes according to temperature. Its components are: ducer at one end and a connector at the other. The transducer is protected from adverse weather conditions including direct sunlight which may damage the instrument or affect the readings, by a ventilated cover. Thermo resistant transducer PT100 reader or a cable to an Agisco reading Protective chassis and supporting rod with cable coupling unit is a male 7 pole plug. The sensing element is made of a normalised platinum wire with a resistance of 100 Ω at 0° C. An anodised aluminium rod has the trans- The connector for attaching a manual The instrument is usually mounted on a pole together with other meteorological equipment. It is suggested that the instrument is mounted at least 2 metres above ground level or away from any other features which may affect performance.

Open the catalog to page 1
AIR TEMPERATURE GAUGE - 2

TECHNICAL SPECIFICATION AMBIENT TEMPERATURE SENSOR Type of Sensor Measuring Range 4 wire resistance variation Height = 275 mm Diameter = 170 mm Weight = 0,6 kg Radiation Protection Ventilated cover Protection Level Agisco reserve the right to change their products and specifications without notice AGISCO s.r.l. Via A. Moro 2 - 20060 LISCATE (MI) Italia Tel. +39 02 9587690 - Fax. +39 02 9587381 Rel. 01 - apr. 2008 www.agisco.it - agisco@agisco.it

Open the catalog to page 2

All Agisco s.r.l. catalogs and technical brochures

  1. DAMEXPLORER

    2 Pages

  2. ECLIPSE

    2 Pages

  3. MEGADAM

    2 Pages

  4. OVERCAM

    2 Pages

  5. OVERDAM

    2 Pages

  6. OVERFLOOD

    2 Pages

  7. OVERSITE

    4 Pages

  8. SAFEDAM

    2 Pages

  9. READ 24

    2 Pages

  10. COUNTERS

    2 Pages

  11. HAND HELD

    2 Pages