Agilent M9210A PXI-H 10-bit Digitizing Scope I n d u s tr i e s and A p p l i cat i o ns • Aerospace/defense • Wireless communication • UWB applications (e.g. radar) • Semiconductor testing P r o d u c t D escr i p t i o n The M9210A is a single-slot 3U PXI-Hybrid high-speed Digitizing Scope featuring 2 channels with 1.4 GHz/300 MHz (50 Ω/1 MΩ input) analog bandwidth and up to 4 GS/s realtime sampling rate. The M9210A Digitizing Scope comes with on-board memory of up to 512 MSamples. Making it the best alternative to the Agilent VXI E1428. Challenge the Boundaries Agilent Modular Products Spec ific ations and Charac teris tic s Best accuracy measurements Up to 2-4 GS/s real-time sampling rate Fastest digitizing scope Sample rate > 1.4 GHz bandwidth in 50 Ω Measure the fastest signals > 300 MHz bandwidth in 1 MΩ Scope-like input feature Large on-board memory Selectable AC/DC Auto-synchronous bus system with picoseconds-level accuracy Multi-module synchronization Full scale (FS) range Software support for easy integration Reduced development time Offset range ± 2 V for ≤ 500 mV full scale ranges 50 Ω: ± 5 V for 1 to 5 V full scale ranges 1 MΩ: ± 20 V for 1 to 5 V full scale ranges 1 MΩ: ± 200 V for 10 to 50 V full scale ranges ± 2.5% FS in 50 mV full scale range ± 2% FS in full scale ranges ≥ 100 mV Effective Number Of Bits (ENOB) Chassis slot compatibility: cPCI(J1/J2), PXI-1, PXIe Hybrid

Ordering Information The M9210A, as all Agilent high-speed digitizers, includes the Agilent MD1 soft front panel (SFP) graphical interface. This simple software application can be used to control, verify the functionality and explore the capabilities of your high-speed digitizers. The MD1 SFP contains two main windows, a control window and a display window. The control window, which may be set in either Oscilloscope mode or in Transient Recorder mode, and contains functions that allow you to manipulate the acquisition parameters of the card. The display window shows the full acquisition in the...