Catalogs >
Agilent Technologies - Life Sciences and Chemical >
Extreme Temperature Probing Solutions for Oscilloscope Measurements

Extreme Temperature Probing Solutions for Oscilloscope Measurements
2Pages

Catalog excerpts

Extreme Temperature Probing Solutions for Oscilloscope Measurements - 1

Extreme Temperature Probing Solutions for Oscilloscope Measurements Industry's most comprehensive extreme-temperature chamber testing solutions for oscilloscopes • Perfect probing solution for extreme environmental testing • Supports temperature ranges up to –55 to +150 °C Many engineers have a need to monitor their product in an environmental chamber with an oscilloscope probe to verify performance over a wide range of operating temperatures or to determine the cause of failures at high or low temperatures. Until now, testing in extreme temperature ranges required engineers to use probes outside their speciied operating temperatures, which can damage probes. Most active or passive probes in the market have a speciied operating temperature range anywhere from 0 to 50 °C. However, Agilent’s N2797A extreme temperature active probe can be operated over a much wider –40 to +85 °C range. This allows you to operate the probe head and the supplied probing accessories inside a temperature chamber with the probe pod and oscilloscope located outside the temperature chamber. solder-in probe head, this solution provides engineers with the widest temperature range coverage of –55 to 150 °C, which is the maximum temperature range speciied for automotiveelectronics testing. For extended temperature testing with more extreme temperature range measurements, Agilent offers the N5450B IniniiMax extreme-temperature extension cable with the IniniiMax Series differential probing system, which gives engineers the ability to probe signals at even wider temperature ranges. When used with the Agilent N5381A differential This extreme temperature probing solution provides an ideal solution for engineers working with the semiconductor, consumer, wireless mobile devices, automotive electronics, and computer industries who need to validate and characterize their designs while operating within extreme temperature ranges. When accurate and repeatable current measurements inside the chamber are critical over wide temperature ranges, the N2820A/21A high-sensitivity current probe is the best choice, especially for precision current measurement applications. When the user-deined head is used with the N2820A/21A current probe, it provides the industry’s highest sensitivity current measurement solution among oscilloscope current probes, going all the way down to 50 uA with a maximum current range of 5 A operating over the temperature range of –55 to 150 °C.

Open the catalog to page 1

Extreme Temperature Probing Solutions for Oscilloscope Measurements - 2

probe head current probe There are different bandwidths, temperature ranges and test cycle numbers depending on which probe head/tip you select to use. N5441A differential solder-in probe differential voltage Temperature range Test cycle numbers N5381A differential solder-in probe differential voltage N2797A single-ended active probe Single-ended voltage N2820A current probe with user defined head and silicon jacketed hook-up cable Single-ended current Ordering Information • For InfiniiMax probe with extension cable + probe head, order one of these configurations below, depending on your...

Open the catalog to page 2