*mydirectindustry

Catalogs
Agilent Technologies - Life Sciences and Chemical
AGILENT Rotary Vane Pumps

AGILENT Rotary Vane Pumps

Product catalog summary

Features and Benefits
Agilent's rotary vane pumps are engineered for industrial and scientific applications, providing excellent vacuum performance with high stability, low noise, and minimal oil backstreaming. They meet CE and RoHS standards and are UL and CSA approved. The MS 40+ pump offers high capacity with a compact design, suitable for mass spectrometry and electron microscopy. The HS series pumps feature smart technology with reduced power requirements and environmentally friendly attributes.

Typical Applications
These pumps are used in analytical instruments such as GC-MS, LC-MS, ICP-MS, and MALDI-TOF, as well as in electron microscopes and leak detection systems. They are also applied in industrial vacuum processes like vacuum coatings, metallurgy, and high energy physics research.

Pump Models
The document describes models including DS 42, DS 102, DS 202, DS 302, DS 402, DS 602, HS 452, HS 652, and MS 40+. Each model is detailed with specifications like free air displacement, pumping speed, ultimate pressure, water vapor tolerance, oil capacity, motor rating, and weight.

Accessories
Accessories include rotary vane fluid, oil mist eliminators, filter cartridges, oil drain extensions, and various power cables. Maintenance kits are available to refurbish pumps and maintain vacuum integrity.

HS Series Pumps Features and Benefits
The HS series pumps offer smart capabilities with frequency inverter technology, suitable for a wide range of voltage and frequency conditions, and are environmentally friendly.

MS 40+ Pump Features and Benefits
The MS 40+ pump provides high capacity pumping speed with a compact design, utilizing proven inverter technology for low noise and high throughput.

Technical Specifications

DS 302: Free air displacement at 60 Hz is 285 l/min and 237 l/min at 50 Hz. Pumping speed is 8.2 cfm at 60 Hz and 11.6 m3/h at 50 Hz. Ultimate partial pressure is 10^-4 mbar, and total pressure is 2 x 10^-3 mbar.
DS 402: Free air displacement at 60 Hz is 410 l/min and 342 l/min at 50 Hz. Pumping speed is 12.3 cfm at 60 Hz and 17.4 m3/h at 50 Hz. Water vapor tolerance is 30 mbar.
DS 602: Free air displacement at 60 Hz is 605 l/min and 504 l/min at 50 Hz. Pumping speed is 17.6 cfm at 60 Hz and 25 m3/h at 50 Hz. Water vapor capacity is 550 g/h.
HS 452: Free air displacement is 27 m3/h with a pumping speed of 22 m3/h. It features a nominal rotation speed of 2000 rpm and operates at 100-120/200-240 V.
HS 652: Free air displacement is 40.3 m3/h with a pumping speed of 32 m3/h. It also operates at 2000 rpm with similar voltage requirements as HS 452.

Features and Benefits

Agilent HS series pumps utilize frequency inverter technology for optimal performance across global voltage and frequency conditions.
Smart Pumps feature reduced power requirements, low startup current, and minimal oil mist emissions.
Remote diagnostics and control capabilities are available via RS232/RS485 interfaces.

Accessories and Maintenance

Various maintenance kits are available, including minor and major kits containing valves, O-rings, seals, and vanes.
Oil and accessories include rotary vane fluid, oil mist eliminators, and exhaust filters.
Foreline roughing traps are designed to prevent backstreaming of mechanical pump fluids.

Ordering Information Each pump model and accessory has a specific part number for ordering. The document provides detailed part numbers for pumps, maintenance kits, and accessories.

Specifications

The HS 652 Smart Pump operates at a maximum power of 780 W and features an auto-tuning pressure of 40 mbar. It is designed for high gas load applications and offers improved performance over traditional models.
The MS 40+ is a mono-stage rotary vane pump with a small footprint and high pumping capacity. It operates at pressures below 10 Torr and is suitable for applications like mass spectrometry and electron microscopy.
Technical specifications for the MS 40+ include a free air displacement of 828 l/min, a pumping speed of 40 m3/h, and an ultimate total pressure of 5x10^-2 mbar. It has a noise level of ≤ 62 dB(A) and operates within a temperature range of 12-40 °C.

Features and Benefits

The pumps feature sophisticated electronics and mechanical design, allowing for high capacity and reduced dimensions.
They offer worldwide service capability with three levels of product support, including 24h advance exchange and factory repair.
The T-Plus software enables control of pump parameters via PC, enhancing uptime and reliability.
Interface capabilities include I/O and RS232/RS485 for system integration and remote diagnostics for monitoring oil level, temperature, power, and current.

Performance Data

Pump speed and pressure curves are provided, illustrating the performance of the HS 652 and MS 40+ models under different conditions.
The HS 652 pump speed curve shows performance at full speed of 2000 rpm, while the MS 40+ pump speed curve includes data for speeds of 1200, 1500, and 1800 rpm.

Conclusion The document highlights the advanced features and capabilities of the HS 652 and MS 40+ rotary vane pumps, emphasizing their efficiency, compact design, and suitability for various scientific and industrial applications.

Catalog excerpts

AGILENT Rotary Vane Pumps Typical Applications Pump Models HS Series Pumps Features and Benefits 22-25 HS Series Pump Models 26-27 MS 40+ Pump Features and Benefits 28-29 MS 40+ Pump Model

Open the catalog to page 1

Agilent Rotary Vane Pumps Features and Benefits A reliable line of pumps to cover the most demanding industrial and scientific applications ● Thanks to a very simple and highly reliable design, these field proven rotary vane pumps provide excellent vacuum performance. Agilent’s quality and manufacturing standards ensure that the DS Rotary Vane Pumps provide high pumping stability for light gases, low noise, minimal oil backstreaming, and a long operating life. ● Agilent’s DS Rotary Vane Pumps conform with CE and RoHS requirements, and all pumps are UL and CSA approved. Agilent’s world class technical...

Open the catalog to page 2

Dual Stage Pumps DS Series: the two stage design allows: • Low 10-3 mbar operation • Low operating temperature • Minimal backstreaming at low pressure • Good pumping efficiency and gas ballast in the low 10-2 mbar region Rotary Vane Pumps ROTARY VANE Pumps Worldwide Motors • Pump motors, available as 1-phase or 3-phase, are suitable for all voltages and frequencies worldwide • Operational voltages are easily selectable, allowing greater flexibility, easy planning and inventory reduction Socket Type IEC320 • Permits use of standard power cable • Eliminates the need to open box and wire the motor...

Open the catalog to page 3

Agilent Rotary Vane Pumps Typical Applications ICP-MS. Photo courtesy Agilent Scientific Instruments. Electron Microscopes Analytical Instruments and Mass Spectrometry Small pumps, typically the DS202 and the DS302, are still used in competition with dry pumps to rough the system and the high vacuum Turbo or Diffusion pump. condensable vapor. Rotary Vane Pumps are the most common primary vacuum pumps used on GC-MS, LC-MS, ICP-MS, and MALDI-TOF Instruments. GC-MS typically uses our smallest pump, the DS42; the pump is needed to rough the system and back the high vacuum Turbo or Diffusion pump....

Open the catalog to page 4

Rotary Vane Pumps ROTARY VANE Pumps Freeze Drying equipment. Distillation apparatus. Photo courtesy University of Torino, Italy. Industrial Vacuum Processes Vacuum coatings, Metallurgy Vacuum Furnaces, Lamps and TV Tube manufacture, Sterilizers, Freeze Dryers, Glove Boxes, High Speed Centrifuges, and Flywheels (for energy storage) represent the main Industrial applications for Dual Stage Rotary Vane pumps. In the first four fields of application the Rotary Pumps are used as roughing and backing pumps for High Vacuum Turbo or Diffusion pumps, while in the others the Rotary Pumps are typically...

Open the catalog to page 5

Agilent Rotary Vane Pump Models DS 42 Ultimate total pressure* (mbar) Ultimate total pressure with gas ballast* (mbar) Water vapor tolerance (mbar) Water vapor capacity (g/h) Inlet flange Exhaust flange Pumping speed* Ultimate partial pressure* (mbar) Oil capacity min/max (l) Motor rating 1 ph Nominal rotation speed

Open the catalog to page 6

ROTARY VANE Pumps DS 402 Rotary Vane Pumps

Open the catalog to page 7

Agilent Rotary Vane Pump Models Dimensions: millimeters (inches) Technical Specifications Free air displacement Pumping speed* Ultimate partial pressure* Ultimate total pressure* Ultimate total pressure with gas ballast* Water vapor tolerance Water vapor capacity Oil capacity max Motor rating 1ph Nominal rotation speed Weight Inlet flange Exhaust flange 10-4 mbar 4 x 10-3 mbar 2 x 10-2 mbar 15 mbar 25 g/h 0.5 l

Open the catalog to page 8

ROTARY VANE Pumps DS 42 - Pump Speed Curve Rotary Vane Pumps Ordering Information Dual Stage Rotary Vane Pump DS 42 120V-60Hz DS 42 220-240V - 50/60Hz Oil and Accessories Rotary vane fluid, DS31 type, 0.5 liter Oil mist eliminator KF16 Oil mist eliminator 3/4 G DS 42 filter cartridge (pkg. of 2) Oil drain extension NW 16 centering ring Viton NW 16 aluminum clamp Power cable not available. The correct cable for electrical wiring is a three wires (Ph+N+Earth) cable. The wire section has to be at least 1 mm2 (AWG17), and the cable external diameter has to be between 7 mm to 12 mm. DS 42 - Pump Speed...

Open the catalog to page 9

Agilent Rotary Vane Pump Models Alternative mounting holes are also available, with (1) = 226 (8.9) and (2) = 98 (3.8), with hole Ø = 7 (0.3) Dimensions: millimeters (inches) Technical Specifications Free air displacement Pumping speed* Ultimate partial pressure* Ultimate total pressure* Ultimate total pressure with gas ballast* Water vapor tolerance Water vapor capacity Oil capacity min/max Motor rating 1ph Nominal rotation speed Weight Inlet flange Exhaust flange 10-4 mbar 2 x 10-3 mbar 2 x 10-2 mbar 15 mbar 60 g/h 0.2/0.5 l

Open the catalog to page 10

ROTARY VANE Pumps DS 102 - Pump Speed Curve Rotary Vane Pumps Effective Pumping Speed (m3/h) 50 Hz Pressure (mbar) Ordering Information Dual Stage Rotary Vane Pump DS 102 with 1 phase worldwide motor* Oil and Accessories Rotary vane fluid, DS19 type, 1 liter Rotary vane fluid, DS19 type, 1 liter (USA)* Rotary vane fluid, DS19 type, 1 gallon (USA) Oil mist eliminator Oil mist replacement cartridge (pkg. of 2) NW 25 oil exhaust filter NW 25 oil exhaust replacement cartridge Oil return kit Oil drain extension European plug power cable 2 meters 1 ph USA plug power cable 2 meters 1 ph UK plug power...

Open the catalog to page 11

Open the catalog to page 12

ROTARY VANE Pumps DS 202 - Pump Speed Curve Rotary Vane Pumps Effective Pumping Speed (m3/h) 50 Hz Pressure (mbar) Ordering Information Dual Stage Rotary Vane Pump DS 202 with 1 phase worldwide motor* Oil and Accessories Rotary vane fluid, DS19 type, 1 liter Rotary vane fluid, DS19 type, 1 liter (USA)* Rotary vane fluid, DS19 type, 1 gallon (USA) Oil mist eliminator Oil mist replacement cartridge (pkg. of 2) NW 25 oil exhaust filter NW 25 oil exhaust replacement cartridge Oil return kit Oil drain extension European plug power cable 2 meters 1 ph USA plug power cable 2 meters 1 ph UK plug power...

Open the catalog to page 13

All Agilent Technologies - Life Sciences and Chemical catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list