Catalogs >
Agilent Technologies - Life Sciences and Chemical >
Agilent E6640A EXM Wireless Test Set

Agilent E6640A EXM Wireless Test Set
23Pages

Catalog excerpts

Agilent E6640A EXM Wireless Test Set - 1

EXM Wireless Test Set Datasheet Solve today, evolve tomorrow Agilent EXM Benefits • Optimize multi-device testing with up to four TRX channels per EXM: each is a complete vector signal analyzer/vector signal generator (VSA/VSG) instrument • Easily test multi-format devices with standard-specific X-Series measurement applications • Maximize throughput with raw hardware speed and advanced sequencing • Increase first-pass yield with superior signal purity and measurement accuracy • Get up and running in hours, not days, with validated turnkey chipset solutions In wireless device manufacturing, meeting ever-tougher goals and tighter schedules is easier when you have access to the best resources. The Agilent Technologies EXM wireless test set scales with your production needs and is in sync with the latest cellular and WLAN chipsets. Better yet, it delivers the speed, accuracy, and port density you need to ramp up rapidly and optimize full-volume manufacturing. The EXM is designed for multi-device testing with up to four TRXs: each is a complete vector signal analyzer (VSA), vector signal generator (VSG), and four-port RFIO. It can easily test multi-format cellular and WLAN devices including the latest technologies such as: • LTE-Advanced Carrier Aggregation (CA) • 802.11n/ac Multiple Input Multiple Output (MIMO) • LTE FDD/TDD • TD-SCDMA • HSPA+, W-CDMA • 1xEV-DO, cdma2000® • GSM/EDGE/Evo • 802.11a/b/g/n/ac

Open the catalog to page 1

Agilent E6640A EXM Wireless Test Set - 2

Agilent Technologies provides the speed, performance, and results you can trust…across the wireless device lifecycle Development Design verication & conformance (RF/RRM/PCT) Ultimate scalability & port density Exceptional value for cellular verication Low-cost WiCon test Industry’s 3G benchmark Industry benchmark GPS LTE-TDD GNSS 802.11ac W-CDMA WLAN HSPA+ HSPA TD-SCDMA EDGE Evo TD-HSPA MIMO Bluetooth® 1x EVDO Speed, performance and results you can trust...Across the wireless device lifecycle

Open the catalog to page 2

Agilent E6640A EXM Wireless Test Set - 4

Product Features X-Series user interface1 Display port Each TRX has a fully integrated VSA/VSG 1. Technology-specific software. Sold seperately. 2. Included on each TRX module. 4

Open the catalog to page 4

Agilent E6640A EXM Wireless Test Set - 5

E6640A EXM Applications Cellular Application Flexibility • Consistent repeatability of standard-based X-Series measurement applications • One application license covers up to four TRX units per mainframe • SCPI-controlled PXIe OBT compatible with EXT/E6630A • HSPA+, W-CDMA • GSM/EDGE/EDGE Evo • TD-SCDMA Wireless connectivity • 802.11a/b/g/n/ac • WiMAX • Bluetooth® 1.0 to 4.0 • GNSS: GPS, Galileo, GLONASS, Beidou, SBAS, QZSS • Digital video MIMO (2x2, 3x3, 4x4) and carrier aggregation • Switched MIMO for manufacturing test • True MIMO (multi-TRX) for design validation • LTE-A CA inter- and...

Open the catalog to page 5

Agilent E6640A EXM Wireless Test Set - 6

Product Specifications Definitions and conditions Specification Specifications describe the performance parameters covered by the product warranty and are valid from 20 to 35 °C unless otherwise noted. Typical Typical describes additional product performance information that is not covered by the product warranty. It is performance beyond specifications that 95 percent of the units exhibit with a 95 percent confidence level. This data, shown in italics, does not include measurement uncertainty, and is valid only at room temperature (approximately 25 °C) after alignment within the stated...

Open the catalog to page 6

Agilent E6640A EXM Wireless Test Set - 7

Vector signal analyzer performance Performance Capture depth Frequency and time specifications Frequency range All RF ports (options are per TRX module) Option E6640A-504 380 MHz to 3.8 GHz Option E6640A-5WC 1.1 to 1.8 GHz, 2.3 to 2.6 GHz, and 4.8 to 6.0 GHz 380 MHz to 6.0 GHz Option E6640A-506 Specified frequency range (dependent on selected frequency range option) 380 to 495 MHz 695 to 920 MHz 1425 to 1485 MHz 1620 to 2030 MHz 2300 to 2700 MHz 3400 to 3800 MHz 4900 to 6000 MHz Frequency reference Accuracy, aging rate, stability Refer to Timebase Specifications CW measurement frequency...

Open the catalog to page 7

Agilent E6640A EXM Wireless Test Set - 8

Vector signal analyzer performance continued Amplitude accuracy and range specifications (continued) CW absolute amplitude accuracy RF3 I|O and RF4 I|O ports (configured to input mode in specified frequencies) Frequency range Input level ≤ –8 to –70 dBm 380 to 495 MHz < ±0.60 dB, < ±0.30 dB typical 695 to 730 MHz < ±0.60 dB, < ±0.25 dB typical > 730 to 920 MHz < ±0.50 dB, < ±0.15 dB typical 1425 to 1485 MHz < ±0.65 dB, < ±0.30 dB typical 1620 to 2030 MHz 40 MHz BW < ±0.45 dB, < ±0.20 dB typical 160 MHz BW < ±0.70 dB, < ±0.35 dB typical 2300 to 2700 MHz 40 MHz BW < ±0.55 dB, < ±0.25 dB...

Open the catalog to page 8

Agilent E6640A EXM Wireless Test Set - 9

Vector signal generator performance Performance Arb bandwidth Arb sample memory (storage capacity) Frequency specifications Frequency range All RF ports (options are per TRX module) 380 MHz to 3.8 GHz Option E6640A-504 1.1 to 1.8 GHz, 2.3 to 2.6 GHz, and 4.8 to 6 GHz Option E6640A-5WC 380 MHz to 6.0 GHz Option E6640A-506 Specified frequency range (dependent on selected frequency range option) 380 to 490 MHz 695 to 960 MHz 1100 to 1325 MHz 1425 to 2180 MHz 2300 to 2700 MHz 3400 to 3800 MHz 4900 to 6000 MHz Frequency reference Accuracy, aging rate, stability Refer to Timebase specifications...

Open the catalog to page 9

Agilent E6640A EXM Wireless Test Set - 10

Vector signal generator performance continued Amplitude accuracy and range specifications (continued) Absolute level accuracy (specified frequencies, CW) continued 3400 to 3800 MHz Level ≤ +5 to –15 dBm < ±0.60 dB, < ±0.20 dB typical Level ≤ –15 to –80 dBm < ±0.60 dB, < ±0.30 dB typical Level ≤ –80 to –110 dBm < ±1.10 dB, < ±0.55 dB typical 4900 to 6000 MHz Level ≤ +5 to –15 dBm < ±0.70 dB, < ±0.25 dB typical Level ≤ –15 to –80 dBm < ±0.75 dB, < ±0.30 dB typical Level ≤ –80 to –100 dBm < ±1.00 dB, < ±0.50 dB typical Setting resolution 0.01 dB VSWR RF3 I|O and RF4 I|O ports (configured to...

Open the catalog to page 10