Agilent 490 Micro GC Biogas Analyzers Data Sheet Key benefits • Complete Solution The Agilent 490 Micro GC Biogas Analyzers are shipped as a total solution. The analyzers are factory tuned and come with final test data, analytical method parameters, analyzer user manual and a check-out sample. • Optimized Configuration The Biogas Analyzers provide the results and ruggedness you demand in the laboratory or in the field for the analysis of biogas and related sample streams. Agilent provides a single part number Biogas and Extended Biogas Analyzer depending on the nature of the sample. • Ready-to-Go Start-up is easy; the analyzer ships fully loaded with a method and is ready-to-go upon installation. • Easy to Operate Agilent's 490 Micro GC is designed to achieve the best possible results. In addition, this system does not require a high degree of operator skills to be used successfully. • The Speed You Need Micro GC is all about fast chromatography. Precise gas analysis in seconds rather than minutes provides improved product quality and more exact product valuation. • Fast Delivery The Agilent Biogas Analyzers are shipped from stock ensuring short delivery times. Introduction Biogas is produced through biological processes such as anaerobic fermentation or digestion of organic material. The main components of biogas are methane and carbon dioxide, with some other permanent gases, hydrogen and hydrogen sulfide. The exact composition of the biogas is related to the origin of the organic material. Biogas is considered a renewable and sustainable energy source; it can fuel any type of heat engine to generate either mechanical or electrical power. To increase its caloric values, it is sometimes necessary to remove some of the carbon dioxide or blend it with other hydrocarbon streams. The increasing interest in biogas results in a growing demand for fast and efficient analysis technology to determine its composition. That is where the Agilent 490 Micro GC Biogas Analyzers can play a significant role. Agilent Technologies

Choose the right Biogas Analyzer for your needs Channel 1 – Permanent gases Hydrogen Depending on the composition of your biogas sample, Agilent has two 490 Micro GC based Biogas Analyzer configurations available. Methane Carbon monoxide For pure biogas analysis, including permanent gases and hydrogen sulfide, the Agilent 490 Micro GC Biogas Analyzer is recommended; even ethane and propane can be can be analyzed with this analyzer setup. This Biogas Analyzer consists of a dual channel cabinet including a 10-meter CP-Molsieve 5A with argon as carrier gas, providing excellent sensitivity and linearity...

Agilent 490 Micro GC Biogas Analyzer Agilent 490 Micro GC Biogas Analyzer Extended Micro GC cabinet Number of column channels CP-MolSieve 5A column channel CP-PoraPLOT U column channel 2 S with backflush and retention time stability (RTS) S with backflush S with backflush and retention time stability (RTS) S with backflush CP-Sil 5 CB column channel All channels equipped with heated injectors (up to 110 °C) S Dual Carrier gas; Argon on Molsieve 5A, Helium on other channels Sample inlet UltiMetal treated S S Heated sample line (up to 110 °C) S S CH4, C2, and C3 hydrocarbon analysis...

Agilent 490 Micro GC Biogas Analyzer Extended 11 28 6.5 16 21.5 55 22 10 Micro GC Power Supply 1.8 4.5 3.4 8.5 6.7 17 3.3 1.5 Ordering information The Agilent Biogas Analyzers can be purchased by ordering the main part number G3582A and an option number per analyzer type; option numbers for the Biogas Analyzers are displayed below. Product description Part number Agilent 490 Micro GC Analyzer G3582A Agilent 490 Micro GC Biogas Analyzer G3582A#110 Agilent 490 Micro GC Biogas Analyzer Extended G3582A#111 www.agilent.com/chem/gcsystems Agilent...