AGLP-1 Parallel Gripper

1 / 2 PagesView full catalog

AGLP-1 Parallel Gripper

Product catalog summary

Features and Benefits:

The AGLP-1 Parallel Gripper features T-Slot bearing supported jaws to prevent breakage and enhance load-bearing performance.
It includes a rugged rack and pinion synchronizing mechanism.
The gripper offers a high gripping force to weight ratio and a compact design with a long stroke.
True parallel jaw motion facilitates easy tooling.
The unit is permanently lubricated for non-lube air operation, complying with OSHA regulations.
Hall effect sensors are available to monitor the open and closed positions of the jaws.
The gripper is fully field repairable, reducing costs and downtime.

Ordering Information:

Specify the design/model number and options when ordering.

Specifications:

Design: Parallel, Double Acting, Synchronized Jaws
Stroke: 0.25 in [6.4 mm]
Gripping Force at 80 PSI [5.5 BAR]: Closing and Opening - 10 lbs [44 N]
Time to Close/Open: 0.12 sec
Pressure Range: 10-100 PSI [0.7-7 BAR]
Temperature Range: -20˚/180˚F [-28˚/80˚C]
Side Play: ± 0.001 [0.03 mm]
Loading Capacity: Static and Dynamic tensile and compressive limits are 65 lbs and 20 lbs respectively, with maximum moments of 60 in/lb and 15 in/lb.
Material: High Strength, Hard Coated aluminum bronze alloys, Steel
Weight: 2 oz [56 g]
Piston Diameter: 0.625 in [15.8 mm]

Sensor Options:

Sensor Types: NPN or PNP
Connector Types: Potted or Quick Disconnect
Size Options: 1, 2, 3, 4

Additional Information:

Technical specifications for sensors are available on the 'Sensors Accessories' page. The gripper is patented and made in the USA. Tolerances for dowel holes and threads are specified for both imperial and metric measurements.

2D and 3D CAD files can be downloaded from the AGI Automation website.

Catalog excerpts

AGLP-1 Parallel Gripper T-Slot Bearing Series, Low Profile FEATURES AND BENEFITS • Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance. • Rugged rack and pinion synchronizing. • High gripping force to weight ratio. • Compact design with long stroke. • True parallel jaw motion for easy tooling. • Units are permanently lubricated for non-lube air operation, allowing for compliance with OSHA regulations. • Hall effect sensors are available to monitor open and closed position of the jaws. • AGLP is fully field repairable for cost savings and minimum down time Gripping Force @ 80 PSI [5.5 BAR] Closing: 10 lbs [44 N] Opening: 10 lbs [44 N] Time: Close: Open: Pressure Range: Low/High Temperature Range: Low/High -20˚/180˚F [-28˚/80˚C] Side Play: 60 in/lb [6.7 Nm] 60 in/lb [6.7 Nm] 60 in/lb [6.7 Nm] 15 in/lb [1.6 Nm] 20 in/lb [2.2 Nm] 15 in/lb [1.6 Nm] Loading Capacity: Max Tensile T Max Compressive C Max Moment Mx Max Moment My Max Moment Mz Material: High Strength,Hard Coated aluminum bronze alloys, Steel Weight: January 2009 - PATENTED Made in the USA WARNING! DO NOT EXCEED MAXIMUM EFFECTIVE FINGER LENGTHS Finger Length (in) WARNING! Do not exceed tooling jaw length. See Chart above. LOOK! More Technical specifications for sensors on “Sensors Accessories” page. HOW TO ORDER When ordering, please specify: Design/Model Number and Options. SIZE: 1, 2, 3, 4 DESIGN/MODEL AGLP TYPE M = METRIC = IMPERIAL – 1 – M – 3 – 1 – 1 SENSOR OPTIONS 1 = CLOSED 2 = OPEN 3 = BOTH SENSOR CONNECTOR 1 = POTTED 2 = QUICK DISCONNECT Piston Diameter: LOADING INFORMATION HOLDING FORCES CHART Design: Parallel, Double Acting, Synchronized Jaws * NOTE: Hall Effect 4mm dia., 5-24 VDC, 22 mA and comes with 2 meter cable or quick disc. Sensor Part # SHN01, SHNQ3, SHP01, SHPQ3 American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943 info@AGI-Autom

Open the catalog to page 1

T-Slot Bearing Series, Low Profile 1/16" S.F. X 1/8" DEEP [2MM S.F. X 3MM DEEP] (2) DOWEL HOLES SENSOR BRKT. #4-40 X 3/16" DEEP [M3 X 6MM DEEP] (4) HOLES 3/32" S.F. X 3/16" DEEP [3MM S.F. X 6MM DEEP] (2) DOWEL HOLES 2D & 3D Download 2D & 3D CAD Files @ www.AGI-Automation.com Unless noted, all tolerances are as indicated here: All Dowel Holes are SF (Slip Fit) Locational Tolerance ± .0005" [.013mm] Metric Threads Course Pitch American Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 • Fax: 203-452-5943 [email protected] • www.AGI-Automati

Open the catalog to page 2

AGLP-1 Parallel Gripper

AGLP-1 Parallel Gripper

Catalog excerpts

All AGI Automation Components catalogs and technical brochures