Series 100 Trace N2 Gas Analyser Analysis of N2 in Argon or in Helium to ppb levels About: The AGC Series 100 SED is engineered for the continuous monitoring of N2 in Ar or N2 in He. Its N2 specific detector has been derived from our extremely successful High Frequency Argon Discharge Detector (ADD) system, the Series 100 HF-ADD Gas Analyser. AGC Instruments has been providing this system configuration for several years to the gas manufacturing companies and especially to argon and helium specific plants throughout the world. Spectral Emission Detector (SED) The emission wavelength intensity of the Nitrogen molecule is selected to determine the trace amount of Nitrogen in Argon or Helium Matrix Gas. The response is proportional to the nitrogen concentration in low ppb to high ppm range. Argon or Helium Purification Plants Steel Industry Air Separation Plants Welding Gas Manufacturing Using a spectral emission technique, a unique quartz ionisation chamber is utilised in which the sample gas is ionised by a high frequency tuned oscillator with the resultant emission wavelength intensity of the nitrogen component is directed through a narrow band pass filter and is detected via a photomultiplier tube. Speciality Gas Manufacturing Plants Doping Gas Manufacturing Filling Stations for Cylinder & Trucks Semiconductor Industry Chemical Plants Wafer Fabs in Electronic Industry Visit us at ARABLAB Gas Chromatography since 1965

Specifications: Range: Digital Output (4-½ digit meter) Better than 0.01% of Full Scale (1) Zero Drift* : *(1) Over 24 hours at dT of operating temperature ±2°C Zero Drift*(2): *(2) Over 24 hours at dT of operating temperature ±5°C) Span Drift*(3): *(3) At approximately 5 ppm N2 in Ar over 24 hours at dT of sample gas of ±2°C) Span Drift*(4): *(4) At approximately 5 ppm N2 in Ar over 24 hours at dT of sample gas of ±5°C Interference*(5) (Relative to O2): 2ppm O2 will reduce the N2 by 20ppb and 0.1ppm will have no effect. *(5) On a 5 ppm reading N2 in Ar by an increase of O2 concentration from...