Gas Leak Detectors Specifications: • Detector Thermal Conductivity with thermistors Visual Readout: LED Bar Graph with adjustable brightness Peak hold with settable duration Pump: Diaphragm type with Pump speed control Battery: Rechargeable Ni-Cd, 7.36V/800mAh Battery Life: 7-8 hours, recharged to 95% of capacity in 1 hour About the Mini Gas Leak Detector Low Battery Indicator, Very low battery shutdown AGC Instruments offers the Mini Gas Leak Detector (Model 21-072) which will easily find any gas that is leaking from a pressurised system. By using a thermal conductivity detector, this instrument will respond with speed to any gas mixture that has a thermal conductivity different to air. Adjustable sensitivity for low & high ranges Time constant/Average With a high signal to noise ratio, via amplification we are able to deliver a maximum usable sensitivity. Helium leaks of 1 x 10-5 cc/sec are easily detected. Other gases include Refrigerant leaks of 1.1 x 10-4 cc/sec and Argon leaks of 1.0 x 10-4 cc/sec. Zero Manual with drift elimination Weight: Instrument: 476g / Charger: 277g Principle of Operation The probe is passed over the area to be checked, a sample is drawn in automatically into the thermal conductivity detector. A signal is registered on the meter when a leak is detected. Minimum leak rate required to produce 10% deflection of full scale: This clean and easy to use system ensures that no contamination is left that traditionally is caused when using a soap solution. By using the probe, it is easy to reach difficult locations within a system. The probe is small enough to find the exact location of a leak. The model 21-072 is not designed to be used to determine leaks of combustible gases. www.agc-instruments.com Headquarters Shannon Free Zone West, Shannon, Co. Clare, Ireland T: +353 61 471632 F: +353 61 471042 E: [email protected] China Sales Office Daxing Industrial Development Zone, Beijing, China T: +86 10 6021 5801 F: +86 10 6021 5892 E: [email protected]