Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. AGAB Pressautomation AB
  3. MASTERCLAMP MC4-10

MASTERCLAMP MC4-10

MASTERCLAMP MC4-10
1 / 1 PageView full catalog

MASTERCLAMP MC4-10

Product catalog summary
Product Overview:
The MC4-10 is a comprehensive die clamp designed for high clamping force and efficiency. It features a quick clamping time with a 5 mm stroke per lap, self-locking capabilities, and has been vibration tested. The stroke adjustment is variable from 0 to 50 mm, and it is designed for easy clamping without requiring long extensions.

Components:
  • Sleeve with nut for ratchet spanner.
  • Internal right-hand thread for the bolt and left-hand thread for the clamping flange.
  • Clamping flange with external left-hand thread.
  • Bolt with external right-hand thread and sliding key for the clamping flange.

Specifications:
The product data sheet provides detailed specifications for different models of the die clamp, including dimensions and forces:
  • MC 4-18: Clamping force of 35 kN, static force of 100 kN.
  • MC 6-22: Clamping force of 35 kN, static force of 155 kN.
  • MC 8-28: Clamping force of 35 kN, static force of 225 kN.
  • MC 10-36: Clamping force of 35 kN, static force of 350 kN.

Ordering Information:
For inquiries or orders, specify the maximum die weight (W), die flange height (F), and measure your T-slot dimensions (a, b, c, h).
See more

Catalog excerpts

MASTERCLAMP MC4-10-1

Product data sheet ver 2024-002 Die clamp MC4-10 MC4-10 is a complete die clamp with high clamping force and a long turn: - Quick clamping time, 1 lap = 5 mm stroke Self locking and vibration tested Variable stroke adjustment 0-50 mm Easy to clamp, no long extension for clamping Sleeve with nut for ratchet spanner. Internal right-hand thread for the bolt and left-hand thread for the clamping flange Clamping flange with external left-hand thread Bolt with external right-hand thread and sliding key for the clamping flange Clamping force Static force - Specify max. die weight (W) - Specify die flange height (F) - Measure your T-slot (a, b, c, h) b AGAB Pressautomation AB Svanhalsgatan 17 S-256 57 HELSINGBORG Sweden E--mail: [email protected] www.agab.se Page 1 (1)

 Open the catalog to page 1

All AGAB Pressautomation AB catalogs and technical brochures

  1. MAGNETS
    MAGNETS

    3  Pages

  2. COIL TILT
    COIL TILT

    1  Page

  3. QUICK CLAMP
    QUICK CLAMP

    1  Page

  4. HYDRO CLAMP
    HYDRO CLAMP

    4  Pages

  5. IQ-MAGNETS
    IQ-MAGNETS

    4  Pages

  6. HYDRO-CLAMP
    HYDRO-CLAMP

    4  Pages

  7. ROLL-ARMS
    ROLL-ARMS

    4  Pages

  8. COIL-SPRAY
    COIL-SPRAY

    4  Pages

  9. MASTER-LUBE
    MASTER-LUBE

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.