*mydirectindustry

MH100

Product catalog summary

Overview: The MH100 is a powerful trencher designed to be mounted on the arm of excavators, offering significantly faster trenching capabilities compared to conventional digging buckets. It is versatile and can be used in various situations where other digging equipment cannot be utilized.

Specifications:

Trench widths range from 125 to 400mm, with a depth of up to 1.6 meters.
High-speed trenching is up to ten times faster than traditional diggers or backhoes.
Equipped with a turntable for offset operation, allowing access to areas unreachable by other trenchers or excavators.
Twin soil augers facilitate easy backfilling by placing finely cut soil neatly on both sides of the trench.
Features a planetary gearbox and high-speed hydraulic motor for high torque and smooth trenching.

Digging Chains and Teeth:

101.6mm pitch heavy-duty chain with bullet teeth for hard conditions and road/rail trenching, offering trench widths of 200 to 400mm.
75mm pitch chain available for agricultural soils or sand, with optional tungsten carbide teeth for hard soils, offering trench widths of 125 to 400mm.

Excavator Requirements:

Minimum weight of 16 tonnes for safe lifting, considering the trencher's weight, arm extension, and footing gradient.
Hydraulic requirements: 200 to 225 L/min at 250 to 300 Bar on the hammer circuit.

Weight: The trencher weighs between 1200 to 2000Kg, depending on the options selected.

Applications: Suitable for use in canals, down embankments, on roads, and over barriers.

Contact Information: AFT Trenchers Limited, Addison Road, Chilton Industrial Estate, Sudbury, Suffolk CO10 2YW, UK. Tel: +44 (0)1787 311811, Fax: +44 (0)1787 310888, Email: [email protected], Website: www.trenchers.co.uk

Note: The company follows a policy of continuous improvement and reserves the right to change equipment specifications without notice. Illustrations may not reflect current product specifications.

Catalog excerpts

MH100 EXCAVATOR MOUNTED TRENCHER THE MH100 IS A POWERFUL trencher to be mounted on the arm of excavators, cutting many times faster than with a conventional digging bucket. This versatile trencher can be used in many situations where no other digging equipment can be used. Trench widths can easily be varied from 125 to 400mm up to 1.6 metres deep.

Open the catalog to page 1

MH100EXCAVATOR MOUNTED TRENCHER MUM • High speed trenching up to ten times faster than conventional diggers or backhoes. • Cuts the narrowest trench size necessary for the job. Reduces costs of reinstatement, back-fill materials and labour. Digging Chains and teeth 101.6mm pitch heavy duty chain with bullet teeth for very hard conditions and road/rail trenching. Trench widths of 200 to 400mm. Alternatively for agricultural soils or sand a 75mm pitch chain is available. Fully detachable, this can be fitted with hard faced digging blades and optional tungsten carbide teeth for hard soils. Trench...

Open the catalog to page 2

All AFT TRENCHERS LIMITED catalogs and technical brochures

AFT100
2 Pages
AFT WizzWheel 55 & 75
4 Pages
AFT HW60
2 Pages
AFT Sandbander
2 Pages
AFT45
2 Pages