Handling systems
8Pages

Fascinating Movement. Yesterday. Today. Tomorrow.

From the module to the handling system Linear axes, rotary axes and grippers with electrical or pneumatic drives form the basis for more than 20 of our standardized handling systems. Robustness, long service lives and consistently high quality characterize our products. Stator housing Motor winding Position and temperature sensores Plain bearings Our highly dynamic linear motor axes provide short cycle times as well as a compact system structure. The single-cable technology includes the control of the drive as well as position monitoring via hall sensors. Rotor with magnets Pneumatic and...

Handling configurator Our handling configurator significantly reduces your construction time. The 3D model created by you will be adopted immediately to check for interfering contours in your design. A large selection of our standard modules is available for your application. Whether electrical or pneumatic, or with linear motors or spindle/belt drives, your engineers will configure the system and we will support you through optimisation and a performance calculation with a guaranteed cycle time. Special designs are created by our engineers upon customer request and then made available as...

Handling systems – the right system for every application EPS mini YZ Compact, only 40 mm wide, quick and flexible Stroke Z EPS midi YZ Compact handling with boom Y to 500 mm Stroke Z EPS maxi YZ Powerful, robust and dynamic Stroke Z EPS giga YZ Rapid movement of payloads weighing up to 15 kg Stroke Z EPS tera YZ Ideal for precise, powerful press-fitting tasks Stroke Z

EPS mini XZ Compact for longer strokes EPS midi XZ Torsion stiffness and dynamic X axle for long strokes EPS maxi XZ Powerful, dynamic and robust for long strokes EPS gantry s Simple, accessible setup, space-saving EPS gantry h Quickly operate large areas due to suspended setup

EPS mini XYZ Linear, scalable alternative for the robot Stroke Z EPS midi XYZ Dynamic, flexible and scalable Stroke Z EPS maxi XYZ Powerful alternative with variable strokes Stroke Z EPS gantry XXYZ Dynamic for large areas and higher loads Stroke Z * Payload tabl

Control technology – simple systems completely configured Smaller than ever! The C11xx and C12xx series L x W x H: 26.6 x 206 x 106 mm and 25.3 x 216 x 106 mm respectively From controllers through to the complete switch cabinet, we offer a wide range of solutions for the control of electric systems. Prior to delivery, all controllers are configured and parameterized with the system. This saves time and money when commissioning the handling system, which allows you to focus on your application. CANopen DeviceNet EtherCAT Ethernet IP Profibus Profidrive Powerlink Profinet RS485 RS232 Sercos...

Handling and feeding technology Afag Automation AG Fiechtenstrasse 32 4950 Huttwil Switzerland T +41 62 959 86 86 sales@afag.com Afag Automation North America Schaeff Machinery & Services LLC. 820 Fessler's Parkway, Suite 210 Nashville, TN 37210 USA Engineering Technisches Buro Pohler GmbH Gottlieb-Daimler-StraBe 43 89150 Laichingen Germany T +49 7333 9614-0 info@tb-poehler.de Feeding technology Afag GmbH Wernher-von-Braun-StraBe 1 92224 Amberg Germany T +49 9621 650 27-0 Handling systems Afag Hardt GmbH GewerbestraBe 11 78739 Hardt Germany T +49 7422 560 03-0 sales@afag.com Afag Automation...