Catalog excerpts
98 4 1 AERSERVICE FORNISCE PRODOTTI E SOLUZIONI TENENDO CONTO DI RIFERIMENTI NORMATIVI NAZIONALI E INTERNAZIONALI APPLICATIONS The ICAF trolley-mounted air cleaner is the ideal solution for suction and filtration of welding fumes and fumes from occasional manual thermal cutting and the adsorption of low concentrations of substances such as: gas, oil-free vapour, odour produced by various applications in the industrial and chemicals sectors. The high quantity, quality, and lifetime of the activated carbon sections employed (total of 40 kg of carbon media) function EFFICIENCYly with the various gaseous pollutants and make this air cleaner, which was originally designed in the early 1980s, absolutely unique and still very much in demand for severe duty conditions in which the large filtration surface area and the high performance extend the range of application to include the sectors of welding and Mechanical engineering and chemical processing on microparticulates and gases. National and international regulations allow the use of these devices in replacement of conventional air cleaners with an articulated arm in special situations such as occasional or discontinuous use (e.g. 20 hours out of a 40 hour working week) or in situations in which the work processes are dynamic to the point at which a fixed capture system is ineffective. In addition, filtration unit also purifies the air in the surrounding environment, so not only treating the area contaminated by the work process but simultaneously creating air exchange in the workplace and further decreasing the level of pollutants present. To comply with regulations and to obtain high quality filtration with consequent safety for the operator, it is essential to perform correct maintenance/periodic replacement of the filters, which, in our units, provide high capacity for accumulation of contaminants and very low costs for spare parts of the filtration section. WELDING AND FINISHING AREA SHEET METAL WORKING SHOP AERSERVICE SUPPLIES PRODUCTS AND SOLUTIONS TAKING ACCOUNT OF NATIONAL AND INTERNATIONAL NORMATIVE REFERENCES OPERATOR SAFETY Pollutants deriving from industrial and small workshop processes must be captured as close as possible to the point of release and routed to the exterior of the workplace. In the case of intermittent work processes however, such pollutants can be aspirated and filtered out of the air, which is subsequently returned to the workplace. In this case, in addition to the use of portable air cleaner systems the installation of ambient ventilation systems may be required. Italian decree D.Lgs. 81/2008 - 2006/15/EC TECHNOLOGY EMPLOYED To guarantee and satisfy the applicable national and international standards and regulations, we make use of the best available technology, which, combined with superior technical know-how, results in the creation of safe products that are in compliance with the people responsible for using the equipment; for example, the speed of capture of the pollutant is never considered at less than 0.5 m/sec during the design stage (as required by the controlling authorities). ENVIRONMENTAL ASPECT The filtration performance levels guaranteed are established in accordance with international specifications that limit the concentration levels of airborne pollutants for professional activities for which a repeatedly exposed worker does not suffer any form of health impairment. American Conference of Industrial Hygienists (ACGIH) – Italian decree D.M. 20/08/1999. National and international regulations are referred to the values specified by ACGIH.
Open the catalog to page 199 Equipments CONSTRUCTION FEATURES • Self-loading structure in powder painted sheet steel, complete with wheels and handles, and featuring dimensions and weight such as to allow easy manoeuvrability and ergonomic use. • High efficiency extraction unit coupled to a structure with plug fan system and centrifugal impeller with welded backward-turned blade, suitable for handling heavily dust-laden air, protected by and electrowelded safety grille, IP55 motor, efficiency class, two speeds depending on number of poles (2P-2800rpm / 4P-1400- rpm) suitable for increasing the range of use of the...
Open the catalog to page 2100 Highly robust and compact heavy-gauge steel structure with powder coating, the side walls of which function as housings for the filter sections. SUCTION fan unit designed to deliver high performance with low power consumption and to handle severe application conditions. Multi-stage filter section designed for intensive duty and high loads in a range of severe application conditions, having increasing levels of efficiency, installed on the 4 sections of the unit. High filtration efficiency and extended working life of the filters. Our series IBSC suction arm, diameters 125-160-200 mm...
Open the catalog to page 3101 Equipments 3000 mm *2800 mm PRODUCT DATA SHEET Issue PRELIMINARY POLYESTER NEEDLEFELT AREA WEIGHT EN 12127 g/m² DENSITY 0,32 g/cm³ THICKNESS EN ISO 9073/2 mm PORE VOLUME 77 % FIBER POLYESTER COMPOSITION SCRIM POLYESTER FINISH HEAT SET - SURFACE GLAZING LONGITUDINAL CROSS BREAKING LOAD EN 29073-3 720 N 750 N BREAKING ELONGATION EN 29073-3 27 % 70 % ELONGATION at 50 N EN 29073-3 N.A. % N.A. % THERMAL STABILITY (SHRINKAGE) UNI 8279/12 2 % 1 % air at 150°C - 2 h BURST STRENGTH DIN 53861 N.A. KPa AIR PERMEABILITY EN ISO 9237 at 200 Pa l/dm² • min FIBER PROPERTIES: POLYESTER OPERATING...
Open the catalog to page 4102 ICAF - ICAFTH ACCESSORIES HALOGEN LAMP LIGHT FIXTURE Low voltage (12V) device complete with halogen lamp inside suction hood, ON/OFF switch, and power cord for connection to the unit’s electrical panel. IBSC ARTICULATED ARM Model IBSC articulated arm with duct diameter of 160 mm, in aluminium with RAL 3000 red orange peel finish. • IBSC Ø=160 mm, length 2 m • IBSC Ø=160 mm, length 4 m • IBSC Ø=200 mm, length 2 m IBFC FLEXIBLE ARM Model IBFC flexible arm with hose diameter of 160 mm, made of plasticized selfextinguishing PVC. • IBFC Ø=160 mm, length 2 m • IBFC Ø=160 mm, length 3 m • IBFC...
Open the catalog to page 5All AERSERVICE EQUIPMENTS SRL catalogs and technical brochures
-
ARMOTECH-INDUSTRY
3 Pages
-
ARMOFLEX-INDUSTRY
3 Pages
-
BAZ-INDUSTRY
2 Pages
-
BAF-INDUSTRY
4 Pages
-
BA-INDUSTRY
4 Pages
-
EC
3 Pages
-
CA
3 Pages
-
ELEMAX
3 Pages
-
ELE S
2 Pages
-
ELE F
3 Pages
-
CATALOGO WELDING
50 Pages
-
AUTOMOTIVE
10 Pages
-
AER
2 Pages
-
IBF
2 Pages
-
Flexible Hoses
4 Pages
-
AER
6 Pages
-
ECO
6 Pages
-
FACE
6 Pages
-
FACT - FACTH
6 Pages
-
FACILE
6 Pages
-
MF SERIES
10 Pages
-
SUSPENDED EQUITMENTS ICAP - ECOP
16 Pages
-
ARTICULATED ARM IBS SERIES
36 Pages